Country living wood burning sauna heater (6 pages)
Summary of Contents for Saunacore Country Living
Page 1
Saunacore "Country Living" Barrel Sauna 1. Placing 3 bases on the ground in line, be sure the bases are parallel to each other. See Figure-1. 2. Put stave marked “S” on the center of the bases, with end have a groove on its inside face. See Figure-2.
Page 2
7. Placing arc panel marked “R-1” to the left side of panel “R-0” by inner hasp and placing “R-2” to right. See Figure-7. 8. Placing stave marked “A-4” close to stave “A-3” and placing stave marked “B-4” close to stave “B-3”. See Figure-8.
Page 3
11. According to STEP 9,Fix front panel to staves “A-4” and “B-4”.See Figure-11. 12. Next, placing 22 staves ( “A-5” ~ “A-15” and “B-5” ~ “B-15”) around the back/front panel in order. Be very careful to keep the staves tight against each other. Then fix them to back/front panel by self-tapping screws.
Page 4
15. Placing 2 iron bands 6cm to two ends of stave and 2 iron bands between three bases. Lay rubber under steel banding brackets, insert threaded rod through the brackets and install nuts tightly. See Figure-15. 16. Fix all the staves to back/front panels by self-tapping screws tightly. See Figure-16. Figure-15 Figure-16 17.
Page 5
Appendix: MARK IN BARREL Marks In Barrel Marks of Staves and Back Panel (Inside View) Marks of Front Panel (Inside View)