Table of Contents
Advertisement
Quick Links
PLEASE READ CAREFULLY BEFORE OPERATION
1. INSTALLATION
1.1.Transportation
Do not tilt the device during transportation definitely, carry in upright position.
Use appropriate transportation vehicles to prevent damage to the device.
Do not transport the device by pushing or dragging it. Pay attention to prevent damage
to the feet of the device during transportation operations performed with pallet jack or
forklift.
The forklift movement position must be so as to handle the machine in balance.
The length of the forklift feet must be compliant with the machine depth.
The forklift feet must open so as to balance the machine.
The crane movement position must be so as to carry the machine in balance.
A balanced transportation operation must be performed by tying the crane to the rings
on the machine using ropes.
1.2 Connections
1.2.1 Electrical Connection
Before making the electrical connection of the device, check whether the electrical
distribution network and the device requirements are compliant and make the
connection using appropriate cables.
Make sure that the electrical connection is made in compliance with the standards
Feed the device with the network voltage written on the information label.
Make the connection to the electrical installation over an appropriate automatic fuse
and fix the fuse at an easily accessible position in case of danger.
The electrical installation of the device must include a ground line.
Do not place any flammable/ explosive material on or in the device.
Make sure that the electrical supply is in turned off position while checking the device.
If you are suspicious of an electrical leakage in the device, immediately call the
authorized service or call a competent electrician to check the device. While checking
the electrical leakage, do not directly touch the device with any of your organs.
The producer firm is not responsible for damages that may arise out of wrong electrical
connection of the device.
Before operating the device, check for appropriate grounding.
Make the device connection in accordance with the numbers on the supply cable.
Otherwise, your device will be out of the warranty scope.
Aydınlı Mah. Tuzla Mermerciler Org. San. Bölgesi Mermerciler Cad. No:41 Tuzla / İSTANBUL
STRICTLY COMPLY WITH ALL INSTRUCTIONS!
T: 0216 593 02 42 F:0216 593 02 43
www.ndustrio.com
Advertisement
Table of Contents
Summary of Contents for N'DUSTRIO VLTD10
- Page 1 PLEASE READ CAREFULLY BEFORE OPERATION STRICTLY COMPLY WITH ALL INSTRUCTIONS! 1. INSTALLATION 1.1.Transportation Do not tilt the device during transportation definitely, carry in upright position. Use appropriate transportation vehicles to prevent damage to the device. Do not transport the device by pushing or dragging it. Pay attention to prevent damage to the feet of the device during transportation operations performed with pallet jack or forklift.
-
Page 2: Placement Of The Device
1.2.2 Air Discharge Connection Connect the air discharge on the rear side of your device with a pipe suitable for operational installation. This pipe can be flat metal or a flexible pipe. If you don’t make such connection, the air produced by the device at a high temperature and humidity may threaten the environmental conditions in terms of occupational health and safety. - Page 3 Emergency Stop Button Cloth Loading Cover Sieve Cover 2. USE Strictly comply with the following warnings before operating your machine! Make sure that the electrical and air discharge connections of the machine are made. Laundry in excess of the capacity of your machine must not be loaded in your machine. This may damage your machine and result in insufficient drying of your laundry.
-
Page 4: Down Arrow
Control Panel 2.1. Operation of the Device: SYMBOL NAME FUNCTION Press once for switching on and “Starting” the chosen program. Press once for switching off and canceling operation. Press once for leaving the BACK relevant menu Press once for accessing the DOWN ARROW lower menu UP ARROW... -
Page 5: Maintenance
Filter LED. It is a warning LED to show that the filter is clogged (full). If the LED is on, the filter is clogged. FILTER (covers only the models with a filter). When the drying program is completed. The relevant LED turns on to give a warning. -
Page 6: Before Calling The Service
3.4. Cleaning Regularly clean the outside of your device. Do not use any abrasive chemicals (lime remover, sprit of salt, etc) during the cleaning operation. You can perform surface cleaning with warm water with soap. Before starting cleaning, make sure to disconnect the electrical supply. You can clean the outer coating and drum of your machine by wiping with soft materials (cloths, sponge, etc.) so as not to damage the machine. -
Page 7: Technical Characteristics
6. TECHNICAL CHARACTERISTICS Aydınlı Mah. Tuzla Mermerciler Org. San. Bölgesi Mermerciler Cad. No:41 Tuzla / İSTANBUL T: 0216 593 02 42 F:0216 593 02 43 www.ndustrio.com... -
Page 8: General Instructions
7. GENERAL INSTRUCTIONS Attention: All of the following instructions have to be complied with. 1. Assemble your machine calling an authorized service. 2. Use appropriate transportation vehicles absolutely during transportation. E.g.: forklift, pallet jack 3. Do not delay maintenance periods of your machine. 4.