Basalte ASANO N1 Installation Manual

ASANO N1
Installation Manual

Description

Asano N1 is used to connect one single audio source to the Asano system.
The audio input can be analogue or digital (S/PDIF or USB). With USB you can connect a PC to the Asano system.
The Asano N1 connects to the Asano system using the CobraNet network. The CobraNet source number can be easily
configured using two rotary dials.
Power can be supplied with a 12V DC power supply (not included) or by Power over Ethernet (PoE).

1 Power supply (12V DC)

2 CobraNet

3 Rotary dial

How to mount the unit

Asano N1 can be installed horizontally but can also
be mounted vertically.
Position the screws correctly, to insure N1 is
mounted firmly to the wall with its rubber feet.
4 4
1 2 3
4 4

4 Digital input

a USB
b S/PDIF optical input
c S/PDIF coaxial input
4 4
4 4
4 4
4 4
4 4
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Model No. 701-01
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.

Power requirement

Warning: The unit is designed for operation on 12V DC.
Never connect the device to 230V!
6
4

5 Analogue input

6 Switch

d USB ‹-› S/PDIF
e digital ‹-› analogue
44mm / 1.73"
Ø5mm / 0.19"
Ø9mm / 0.35"
5
188mm / 7.40"
100mm / 3.94" 44mm / 1.73"