Advertisement
Quick Links
Features:
● Utilizes Cree XP-G (R5) neutral white LED, max 350 lumens output
● Powered by four AA batteries
● Uses aspherical reflector, with a wide beam angle
● Anti-glare lens design produces DUAL DISTANCE BEAM illumination
● 3 brightness levels and one flashing mode
● Quick to attach and detach using O-ring mounting straps sized for 20mm-35mm handlebars
● Able to adjust the direction of the headlamp freely
● Made of aluminum alloy and performance plastic
Parts Included
1. BT10 headlamp
2. BA4A battery case
3. Battery case protective sleeve with frame attachment straps
4. Six O-ring mounting straps (two large, two medium and two small)
Note: the large O-ring mounting straps are sized for 30mm-35mm handlebar, while the medium
ones for 24mm-30mm handlebars and the small ones for 20mm-24mm handlebars （ the above
sizes are only for your reference）.
5. Helmet mount
6. Extension cable
7. User manual, warranty card
Battery Specifications
Type
Ni-MH Battery
Alkaline Battery
Non-rechargeable Battery
(Lithium)
Rechargeable Battery
(Li-ion)
Technical Parameters
High
350 lumens
Output
Runtime
2h 45min
Usage
Cross country
Fenix Bike Light BT10
Dimensions Nominal
Voltage
AA
1.2V
AA
1.5V
AA
1.5V
14500
3.7V
General Mode
Mid
200 lumens
5h 30min
Urban utility
Usability
√
Recommended
√
Usable
√
Usable
×
Banned
Low
80 lumens
16h 20min
Commuting
Flashing
Mode
200 lumens
18h 45min
Warning
Advertisement
Related Manuals for Fenix BT10
Summary of Contents for Fenix BT10
- Page 1 Fenix Bike Light BT10 Features: ● Utilizes Cree XP-G (R5) neutral white LED, max 350 lumens output ● Powered by four AA batteries ● Uses aspherical reflector, with a wide beam angle ● Anti-glare lens design produces DUAL DISTANCE BEAM illumination ●...
- Page 2 Note: 1. As with any performance light, the BT10 builds up heat when run in the high brightness level for an extended period. Intelligent circuitry in the BT10 will downshift the light to guard against overheating.
- Page 3 1. BT10 is a high-intensity lighting device capable of causing eye damage. Avoid shining the light directly into the eyes. 2. Avoid touching the metal parts of the BT10 as LED lights accumulate heat when powered up. 3. Waterproof to IPX-6, BT10 can be used in humid conditions but is not suited for water immersion.
- Page 4 4. Please don't disassemble the sealed parts, as doing so can cause damage to the BT10 and will void the warranty. Product Warranty We will replace products afflicted with manufacturing defects within 15 days of purchase and repair a light free of charge within 24 months of purchase if problems develop with normal use;...