Contents Before Use Precautions ..............4 Connecting a USB device ........21 How to read this manual ......... 4 USB Basic Operation ..........21 Search Operation ............23 Basic Operations iPod/iPhone Functions of the Buttons on the Front Panel ... 5 Turning on the Unit ........... 6 Preparation ..............24 Initial Settings ..............
Page 3
Bluetooth Control Remote control Information for using Bluetooth® devices ..44 Battery Installation ...........79 Register the Bluetooth device ......45 Functions of the Remote control Buttons ..79 Bluetooth Setup ............47 Connection/Installation Playing the Bluetooth Audio Device ....48 Using the Hands-Free Unit ........50 Before Installation ............82 Hands-Free Setup .............55 Installing the unit .............85...
Before Use Before Use Ñ Acquiring GPS signal Precautions The first time you turn on this unit, you must wait while the system acquires satellite signals # WARNINGS for the first time. This process could take up to several minutes. Make sure your vehicle Ñ...
Basic Operations Basic Operations Functions of the Buttons on the Front Panel Number Name Motion Remote • Receives the remote control signal. Sensor • Displays the HOME screen (P.8). HOME/[ ] • Pressing for 1 second turns the power off. •...
Basic Operations Turning on the Unit Initial Settings Initial SETUP Press the [HOME]/[ ] button. Perform this setup when you use this unit first time. Set each item as follows. h The unit is turned on. ● To turn off the unit: Press the [HOME]/[ ] button for 1 second.
Page 7
Basic Operations [Clock Adjust] ■ [DEMO] ■ Set the demonstration mode. Default is “ON”. If you select [Manual] for Clock, adjust the date and time manually. (P.7) Touch [Finish]. NOTE • Please set the date and time. If they are not set, some functions may not work.
Basic Operations Adjusting the volume HOME screen descriptions You can adjust the volume (0 to 40). Most functions can be performed from the HOME screen. Turn the knob clockwise to increase, and counter-clockwise to decrease. • Widget (P.14) Touch screen operations •...
Basic Operations Popup menu Turn off the screen Select [Display OFF] on the popup menu. Press the [MENU]/[ATT] button. h Popup menu appears. Touch to display the popup menu. NOTE • Touch the display to turn on the screen. • To display the clock while the screen is off, it is necessary to set "OSD Clock"...
Page 10
Basic Operations Select the playback source • For sources and information displayed when an iDatalink is connected, see OEM Features Operation (P.60). Press the [HOME]/[ ] button. *1 When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or h HOME screen appears.
Basic Operations Customize Short-cut source icons Source control screen descriptions You can arrange the positions of the source icons as you like. There are some functions which can be The 4 items placed in bottom line will appear performed from most screens. on the bottom bar in various screens, as the short-cut playback source icons.
Basic Operations * For right hand drive vehicles, the left and right etc. drawers are swapped. For how to set up the driving position, see User Interface Setup Keys with various functions are displayed here. (P.64). • : Plays all tracks in the folder containing the current track.
Basic Operations Alert Message Display of the received Alert Message This function is to receive alert messages. First, You can read the received alert message you need to turn on the “Emergency Alerts” on afterward. the HD Radio source control screen. (P.28) When an Alert Message comes Touch [ ] on the right side of the HD...
Widget Widget Widget Drive Widget Panel You can change the widget. Press the [HOME]/[ ] button. Press the [HOME]/[ ] button. You can change the widget or customize the widget area. Touch the right top corner of the drive widget panel. h The drive widget list appears.
Widget Importing Image Files Touch and hold the drive widget panel. h Widget customize mode is activated. You can display image files stored in your iPhone or Android smartphone by connecting your iPhone or Android smartphone in which the “KENWOOD Portal APP” application is installed to this unit.
APPS APPS Wireless Mirroring Operation Apple CarPlay Operation You can display the same screen of the Apple CarPlay is a smarter, safer way to use Android smartphone on the monitor of the your iPhone in the car. Apple CarPlay takes unit using the Wireless Mirroring function of the things you want to do with iPhone while the Android smartphone.
Page 17
APPS Ñ Select an Apple CarPlay device Wireless connection You can select the iPhone registered in [Device If two or more iPhone compatible with Apple List] and use it as the Apple CarPlay device. CarPlay have been registered, select the See Register the Bluetooth device (P.45).
APPS Ñ Use Siri Android Auto™ Operation You can activate Siri. Android Auto enables you to use the functions Press the [VOICE] button. of your Android smartphone convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient functions on the Android smartphone while driving.
Page 19
APPS Ñ Ñ Connect Android smartphone Select an Android smartphone If two or more Android smartphones Wired connection have been registered, select the Android smartphone to be used as the Android Auto Connect an Android smartphone via the source. See Switch the connected device USB terminal.
APPS Ñ Using voice control KENWOOD Traffic Powered By INRIX Press the [VOICE] button. You can receive INRIX weather forecast by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed to this unit. Preparation Start speaking.
Connecting a USB device USB Basic Operation Most functions can be controlled from the Connect the USB device with the USB source control screen and playback screen. cable. (P.92) NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switch the operation mode (P.79).
Page 22
Video screen • [DH] : Plays or pauses. • [ ] : Displays the Graphic Equalizer screen. (P.69) • [ ] : Repeats the current track/folder. Each time you touch the key, repeat modes are switched in the following sequence: File repeat ( ), Folder repeat ( ), Repeat...
Ñ Search Operation Link search (Audio file only) You can search for a file of the same artist/ You can search music or video files by the album/genre as that in the current track. following operations. Touch [Link Search]. Touch [1]. Touch the desired tag type.
iPod/iPhone iPod/iPhone Connect the iPod/iPhone using the KCA- Preparation iP103. (P.93) Press the [HOME]/[ ] button. Ñ Connectable iPod/iPhone Touch [ The following models can be connected to this unit. Touch [iPod]. (P.10) Made for ● To disconnect the iPod/iPhone connected •...
iPod/iPhone iPod/iPhone Basic Operation Content list • Touch the left side of the screen to display the Content list. Touch again to close the list. NOTE • Displays the playing list. When you touch a • Set the remote controller mode switch to AUD track/file name on the list, playback will start.
iPod/iPhone Ñ Search Operation Category search You can search for a file by selecting a You can search music files by the following category. operations. Touch [Category List]. Touch [1]. Touch the desired category. Touch [S]. Select a list type. h The list corresponding to your selection appears.
HD Radio™ Tuner HD Radio™ Tuner HD Radio Tuner Basic Operation keys Operation • [E] [F] : Tunes in a station. The method of switching frequencies can be changed (see Seek mode). Most functions can be controlled from the • [CHS] [CHR] : Selects a channel. source control screen.
Page 28
HD Radio™ Tuner • [Emergency Alerts] : Turn on or off the alert message. See Alert Message (P.13). • [Alert Message Log] : Displays the alert message received. See Alert Message (P.13). Picture The picture data or station Logo data is displayed if available from current content.
HD Radio™ Tuner Receive Mode Touch [ ] on the right side of the screen. Touch [AME]. You can set the radio broadcasts receive mode. Touch [ ] on the right side of the screen. Touch [RCV]. Touch [Yes]. Select a receive mode. h Auto memory starts.
Page 30
HD Radio™ Tuner Ñ Direct search Select the desired content from the list. You can tune in by entering the desired frequency or channel number. Touch [ ] on the right side of the screen. Touch [10key Direct]. NOTE • Touch [Info Change] in the channel list. Select the sequence of the list (Song title, artist name, album name).
HD Radio™ Tuner Bookmark Stores tag information (title, artist, album, URL, and description) about the song you are listening to now. Detailed information and QR codes can be displayed according to the stored tag information. Ñ Bookmark registration Delete] ■ Deletes the bookmarks being displayed.
SiriusXM® SiriusXM® Control screen SiriusXM® Basic Operation Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio.
Page 33
SiriusXM® Logo: Channel logo SmartFavorite music channels on the current preset band. See TuneScan™ (P.36). Touching [ ] allows you to switch between • [TuneMix]* : When turned ON, shuffles the Content A, Content B and Content C. preset channels on P1-P6 to play a blend Content A: Artist Name, Song Title of songs from your favorite channels.
SiriusXM® Storing Channels in Preset Direct search Memory You can tune in a channel directly. You can store the current channel in memory. Touch [ ] on the right side of the screen. Touch [Direct Channel]. Tune in the channel you wish to store in the memory.
SiriusXM® Category/Channel search Replay You can specify the desired category and You can replay the last 60 minutes of the select a channel. program from the current channel. Touch [1]. Touch [Replay] on the function panel. Select a category. ■ [E] [F] Press to skip to the previous/next track.
SiriusXM® TuneScan™ To return to live music/content Touch [ ] on the right side of the screen. TuneScan™ is a feature that plays samples from the starts of multiple buffered songs Touch [Live]. from each of the SmartFavorites channels that predominantly play music selections.
SiriusXM® Traffic & Weather Now™ Content Alerts Traffic & Weather Now™ allows you to access When a broadcast program related to the the latest report whenever you want to hear registered artist, song or team starts, an Alert it. First select your city in the set up menu. See Content List screen appears to allow you to Select a City for Traffic &...
SiriusXM® SportsFlash™ SiriusXM SETUP SportsFlash™ will notify you when a big play Touch [ ] on the right side of the screen. happens during a game with one of your Touch [SETUP]. favorite sports teams. Choose to tune in and hear the play unfold like it was live.
Page 39
SiriusXM® Ñ Ñ Parental code Parental Control You can set a SiriusXM parental code for Parental Control is a feature that provides the Parental Control. user with the ability to prevent unauthorized access to mature content and user selected Touch [Parental Code] on the SiriusXM channels.
Page 40
SiriusXM® Touch each channel in the list and set to NOTE ON or OFF. • Touch [All-Channels] to display all channels. • To delete the parental lock channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. Touch each channel on the list and set to ON or OFF.
Page 41
SiriusXM® Touch each content list item you want to To select a Team check or uncheck. Get alerted when your favorite sports team is playing on another SiriusXM channel with GameAlert™ Touch [My Games]. NOTE • You can select (þ) up to 60 artists or songs. Touch the desired league in the list.
Page 42
SiriusXM® Ñ SportsFlash™ setup Touch [ ] twice. Activating SportsFlash Touch [SportsFlash] on the SiriusXM SETUP screen. h SportsFlash is turned on or off. Default is “ON”. Selecting SportsFlash Beep Touch [SportsFlash Beep] on the SiriusXM SETUP screen. ■ [Edit] h SportsFlash Beep is turned on or off.
Page 43
SiriusXM® Ñ Selecting Featured Bands Touch [Done]. Update Messages You can set whether to be notified when the featured seasonal theme is updated. Touch [Featured Bands Update Messages] on the SiriusXM SETUP screen. Featured Bands Update Messages is turned on or off. Ñ...
Bluetooth Control Bluetooth Control Ñ Using the Bluetooth function allows you to use About the smartphone/cell- various functions such as listening to the audio phone and Bluetooth audio file and making/receiving a call. player Information for using This unit conforms to the following Bluetooth specifications: Bluetooth®...
Bluetooth Control Register the Bluetooth device [Android Auto] ■ To connect as Android Auto source. It is necessary to register the Bluetooth audio Touch [ player or smartphone/cell-phone in this unit h Bluetooth pairing waiting dialog before using the Bluetooth function. appears.
Page 46
Bluetooth Control To switch the connected device to a Touch [Yes]. Bluetooth device When data transmission and connection have completed, the Bluetooth connection Touch [Bluetooth] on the Device List icon appears on the screen. screen. NOTE h Bluetooth device list appears. •...
Bluetooth Control Touch the device name to check. Touch [Bluetooth] and set to [ON]. See the following section for each setting. • Change the PIN Code (P.47) • Change the device name (P.47) • Change the settings for Hands-Free function, see Hands-Free Setup (P.55). NOTE •...
Bluetooth Control Playing the Bluetooth Audio Information display * Device • Displays the name of track information. • Connected device name. Most function can be controlled from the Play mode indicator/Playing time source control screen. D, H: Current play mode indicator To select Bluetooth source, touch [Bluetooth] Meanings of individual icons are as follows: icon on the source selection screen.
Page 49
Bluetooth Control Ñ KENWOOD Music Mix NOTE Up to 5 Bluetooth audio device can be • If a connected Bluetooth audio device is operated to play music, connections are switched. connected and switched easily to play music. • When a Bluetooth source is switched to another one, its settings are deleted and the connection Touch [ is restored to the connection before source...
Bluetooth Control Using the Hands-Free Unit Select a dialing method. You can use the telephone function by connecting the Bluetooth telephone to this unit. NOTE • While Apple CarPlay or Android Auto is connected, the Bluetooth Hands-Free function and two Bluetooth devices connections cannot be used.
Page 51
Bluetooth Control Call using call records Select the phone number from the list. Touch [ Select the phone number from the list. NOTE • You can sort the phone numbers in the list by last name or first name. For details, see Hands-Free Setup (P.55).
Page 52
Bluetooth Control Ñ Receive a call Call by entering a phone number Touch [ Touch [ ] to answer a phone call or ] to reject an incoming call. Enter a phone number with number keys. NOTE Touch [ • When shifting the gear to the reverse (R) position and monitoring the picture from the rear view Ñ...
Page 53
Bluetooth Control Ñ Operations during a call ● Call-waiting When you receive a new call while talking on the phone, you can answer the newly received call by touching [ ]. The current call is put on hold. Each time you touch [ ], the caller will change to the other one.
Page 54
Bluetooth Control Ñ Ñ Phone number preset Phonebook transfer You can register frequently used phone You can transfer phonebook data from your numbers in this unit. Bluetooth smartphone using PBAP. Touch [ Touch [ Touch [Edit]. Touch [ h Phonebook data transfer starts. NOTE Select where to preset.
Bluetooth Control Touch [Delete]. [Auto Response]* ■ Set the automatic response time to pick-up h Confirmation message appears. an incoming call. Touch [Yes]. [OFF] (Default): Turns off the Automatic response function. Hands-Free Setup [1/5/10/15/20/25/30]: Sets the ringing time (second). You can make various settings for the Hands- [Auto Pairing] ■...
Other External Components Other External Components View Camera Camera off Touch to exit the camera screen. Switching the Guideline * NOTE Touching each time turns on or off the • To connect a camera, see Connecting the guideline. camera (P.94). •...
Page 57
Other External Components Ñ To set up the camera [Rear Camera Message] * ■ [Always display] (Default): Always displays assignment settings the caution message on the rear camera interruption screen. Touch [Camera Assignment Settings] in [Clear after 5 seconds]: Displays the the Camera setting menu.
Other External Components Adjusting the position of the selected *1 Except the [REAR VIEW CAMERA] setting mark. screen. *2 The [REAR VIEW CAMERA] setting screen only. *3 The [REAR VIEW CAMERA] and [FRONT VIEW CAMERA / DASH CAM] setting screens only. *4 The [FRONT VIEW CAMERA / DASH CAM] and [3rd VIEW CAMERA] setting screens only.
Other External Components Ñ Display the dashboard camera External audio/video players screen (AV-IN) Press the [MENU]/[ATT] button. Connect an external component to the AV h Popup menu appears. Audio input and the Video input terminal. (P.91) Touch [Camera]. Select [AV-IN] as the source. (P.10) Turn on the connected component and start playing the source.
Other External Components OEM Features Operation NOTE • Displayable screens, key names, and screen This unit can display vehicle information when names vary depending on the type of the connected to the bus system of the vehicle connected iDatalink and the model of the vehicle. using an iDatalink (commercially available).
Setup Setup Press the [HOME]/[ ] button. ■ [Backlight]/[Contrast]/[Black]/ [Brightness]/[Color]/[Tint] Touch [ ]. Adjust each setting. Touch [SETUP]. ■ [Aspect] Select a screen mode. [Full]: Changes the aspect ratio of video and displays video fully on the screen. [Normal]: Displays video at the ratio of 4:3. [Auto]: USB device: Displays video fully (vertically or horizontally) with no ratio change.
Page 62
Setup • If you select HDMI as the main source, files [Device Name] ■ with sampling rates higher than 96 kHz in If you select [ON] for [Bluetooth], you can USB selected as the AV output source are change the Bluetooth device name. skipped.
Setup Ñ Display & Button Setup Customizing the button color You can set the button illumination color. Press the [HOME]/[ ] button. Touch [Button Illumination Color] in the Display & Button setting menu. Touch [ ]. Touch the desired color. Touch [SETUP].
Setup Ñ Change the wallpaper image or [Button Illumination Synch] * ■ The color you have selected at [Button color Illumination Color] can be set. If you adjust the color value with the following RGB color Touch [Wallpaper Customize] in the mixer, the adjusted color will be applied to Display &...
Setup System Setup ■ [Beep] Turn the key touch tone on or off. Default is “ON”. You can setup system parameters. [Parking Assist Display] ■ Press the [HOME]/[ ] button. When the iDatalink (commercially available) Touch [ ]. is connected, you can display information about obstacles around the car.
Page 66
Setup Ñ Software Information You can confirm the software version of this unit. Touch [Software Information] in the System setting menu. Confirm the software version. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software.
Controlling Audio Controlling Audio You can adjust various settings such as audio 3-way speaker system setup balance or subwoofer level. (DMX1057XR) Press the [HOME]/[ ] button. Select the appropriate crossover network Touch [ ]. mode for the speaker system used (2-way or 3-way speaker system).
Controlling Audio Touch the speaker (1) you wish to adjust NOTE and set each parameter (2) as follows. • When the 3-way speaker system is selected, the following functions are disabled. – Front focus of Listening Position / DTA – Fader for Controlling General Audio –...
Controlling Audio Equalizer Control When Speaker network is set to 3-way: You can adjust equalizer by selecting the optimized setting for each category. Press the [HOME]/[ ] button. Touch [ ]. Touch [Audio]. h Audio screen appears. ■ [Speaker] Touch [EQ / SW Level]. You can select a speaker type and its size to get the best sound effects.
Controlling Audio Ñ Save the EQ curve Listening Position / DTA Adjust the EQ curve. Listening Position / DTA allows you to improve the sound field depending on the position of Touch [Memory]. the seat you sit. Listening Position / DTA allows you to set Select where to save.
Page 71
Controlling Audio Ñ Front Focus Position DTA control You can fine-adjust your listening position. You can focus the imaginary sound image on the front of the selected seat. Touch [Adjust]. Touch [Front Focus] in the Position / DTA Touch [Delay]. screen.
Controlling Audio Fader / Balance / Zone Control [Size of the Virtual Sound Field] ■ Adjust the size of sound image to meet your taste. If the sound image is shifted from the Press the [HOME]/[ ] button. front, move it back by [Sound Image LR (Front)] or [Sound Image LR (Rear)].
Page 73
Controlling Audio Ñ Zone Control NOTE You can select different sources for front and • When the rear source is switched, the audio source that is output at the AV OUTPUT terminal rear positions in the vehicle. is also switched to the same source. Touch [Dual Zone] on the FAD / BAL / •...
Controlling Audio Volume Offset Set each parameter as follows. Finely adjust the volume of the current source to minimize the difference in volume between different sources. Press the [HOME]/[ ] button. Touch [ ]. Touch [Audio]. h Audio screen appears. [Bass Boost] ■...
Controlling Audio Parametric Equalizer About Adjustments If there are unpleasant peaks, you can slide the (DMX1057XR) peaking filter to the left or right and search the frequencies by ear. Studio engineers use In addition to the conventional Graphic this method to make adjustments quickly and Equalizer, this unit has a parametric equalizer, efficiently.
Page 76
Controlling Audio ● High-Pass Filter ● Peaking Filter Passes signals with frequencies higher than The frequencies in the vicinity of a certain a certain frequency (fc: cutoff frequency) frequency (f0: center frequency) are and attenuates signals with frequencies boosted or attenuated. Use this in the lower than the cutoff frequency.
Page 77
Controlling Audio Ñ Adjust the Parametric Equalizer EQ point (blue/yellow): EQ points that are not currently being adjusted. Preparation Curve (orange): EQ curve of the speaker currently being adjusted. • Correct the value in “Listening Position” and “Front Focus” before adjusting the parametric equalizer. Curve (blue): Overall EQ curve.
Controlling Audio Audio Setup memory When you have finished adjustments, save the results as a preset, and check the effects by switching presets or turning Audio Control settings can be memorized. the Parametric EQ [ON] and [OFF]. The memorized settings can be recalled at any time.
Remote control Remote control This unit can be operated using the remote Functions of the Remote control KNA-RCDV331 (optional accessory). control Buttons # CAUTION Ñ Switch the operation mode • Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure to The functions operated from the remote replace only with the same type.
Page 80
Remote control Ñ Ñ Direct search mode Basic Operation Using the remote control, you can jump directly to the desired channel by entering the number corresponding to the content. NOTE • This operation cannot be performed for the USB device and iPod. Press the [#BS] button several times until the desired content appears.
Page 81
Remote control Key Name Mode Function switch Selects the track or file to be played. For the HD Radio, and SiriusXM sources, switches to broadcast stations received by the unit. Numeric Allows you to enter the number to search in the direct search mode. For details on the direct search mode, see Direct search mode (P.80).
Connection/Installation Connection/Installation This section is for the professional installer. • If the power is not turned ON (“There is an error in the speaker wiring. Please check the For safety’s sake, leave wiring and mounting to connections. ” is displayed), the speaker wire professionals.
Page 83
Connection/Installation Ñ Supplied accessories for installation Cooling fan • Do not press hard on the panel surface when (1 m) installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects (3 m) near the Bluetooth/Wi-Fi antenna.
Page 84
Connection/Installation (Ø3 x 6 mm) (Black) Ñ Installation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Remove the vehicle parts for installing the unit and connecting wires to terminal. 3) Make the proper input and output wire connections for each unit.
Connection/Installation Installing the unit Ñ Confirm the installing position of the display unit ● Vehicles cannot be installed It may be possible to install if it can avoid the following by adjustment for slider position and display height. Lever operations are interfered A hazard switch is hidden from a The display unit hits a panel on the such as shift lever, wiper lever,...
Page 86
Connection/Installation Ñ Positioning the slider in Install the bracket for forward position (accessory 0) each side so that its forward projections are aligned with the slots on the main unit. Remove the four screws from the bottom of the main unit. Projection Screw Projection...
Page 87
Connection/Installation Ñ Ñ Adjusting the display height GPS antenna GPS antenna is installed inside of the car. It Remove the four flat head screws from should be installed as horizontally as possible both sides. to allow easy reception of the GPS satellite signals.
Page 88
Connection/Installation Ñ Ñ Microphone unit Installing the main unit 1) Check the installation position of the NOTE microphone (accessory 3). • Determine the slider position before installing the 2) Clean the installation surface. main unit. (P.86) The slider position cannot be 3) Remove the separator of the microphone changed after installing to the vehicle.
Page 89
Connection/Installation Install the display unit (accessory 8) to Attach the protective cover (accessory =) the main unit. to coupling part, and then fix it with two binding head screws (accessory ~). Main unit NOTE • If the display unit hits a panel on the vehicle, NOTE adjust the display height by referring to Adjusting the display height (P.87).
Page 90
Connection/Installation Ñ Connecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Green/Black Connect to the vehicle’s Accessory 1 parking brake detection switch harness.
Page 91
Connection/Installation Ñ Ñ 3-way speaker system setup Connecting the system and external components ● DMX1057XR Subwoofer Preout Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. Preout RCA Cable (Sold separately)
Page 92
Connection/Installation Ñ Connecting a USB device HDMI input Use HDMI cable KCA-HD100 (optional Accessory 2 (1 m) accessory). When you connect the cable to HDMI terminal, USB device remove the fixture. After connecting the cable, put the fixture again. Fixture USB terminal HDMI connector iDatalink connector...
Page 93
Connection/Installation Ñ Ñ Securing the USB extension Connecting an Android cable smartphone Secure the USB extension cable with insulating Android smartphone tape or the like so that its connectors are not USB cable disconnected. Accessory 2 (1 m) Ñ Connecting an iPod/iPhone USB terminal KCA-iP103 (0.8 m) Lightning Digital AV...
Page 94
Connection/Installation Ñ Connecting the camera For HD video, an HD camera is also used as Rear view camera. Left side view camera and For HD video, an HD camera is also used as Right side view camera Front view camera. Front view camera [4] [6] Video input...
Troubleshooting Troubleshooting Ñ Others Problems and Solutions The Touch Sensor Tone doesn’t sound. If any trouble occurs, first check the following The preout jack is being used. table for possible problems. The Touch Sensor Tone cannot be output from the preout jack.
Page 96
Troubleshooting USB device over current status detected. Incorrect Pass Code entered The connected USB device is rated a current capacity The selected channel is a mature or parental lock higher than the allowable limit. channel, and locked by the parental lock or user lock ...
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. Ñ About files The following audio and video files are supported. ■ Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG-2/MPEG-4 AAC LC 8 –...
Page 98
Appendix ■ Limitation on structure of file and folder USB device Maximum number of folder layers Maximum number of files (per folder) Maximum number of folders (per folder) 9999 Maximum number of folders (per device) Unlimited • You can enter a folder name and file name with 255 or fewer single-byte characters. •...
“Licensed Software. ” number of independent software components, each of The customer shall agree to the terms of this license which is copyrighted by JVCKENWOOD Corporation or agreement before proceeding to use Licensed by a third party. Software.
Page 103
Appendix Article 4 (Rights to Licensed Software) Article 11 (Export Control) All rights to Licensed Software and the associated 1. Licensed Software and the associated literature or literature, including copyrights, shall reside with the like may not be exported to places outside the Licensor or Country (including transmission outside the Country the original right holder who has granted the Right...
Page 105
Appendix LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS EXPRESS OR IMPLIED WARRANTIES, INCLUDING, GRANTED OR SHALL BE IMPLIED FOR ANY OTHER BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF USE. ADDITIONAL INFORMATION MAY BE OBTAINED MERCHANTABILITY AND FITNESS FOR A PARTICULAR FROM MPEG LA, L.L.C.
Page 106
– Connect the equipment into an outlet on a Model Name: DMX1057XR / DMX1037S circuit different from that to which the receiver Responsible Party: JVCKENWOOD USA is connected. CORPORATION – Consult the dealer or an experienced radio/TV 2201 East Dominguez Street, technician for help.
Page 107
Appendix ■ Información acerca de la eliminación ■ Informação sobre a eliminação de de equipos eléctricos y electrónicos pilhas al final de la vida útil (aplicable a los Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor países que hayan adoptado sistemas ou entidade autorizada para que a mesma seja independientes de recogida de...
Page 108
Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society.
Need help?
Do you have a question about the KENWOOD DMX1057XR and is the answer not in the manual?
Questions and answers