Table of Contents
Advertisement
•
Adaptive-Sync (DisplayPort only)
graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efficient, virtually stutter free and
low-latency display update.
* Adaptive-Sync can only be activated within 49Hz ~ 76Hz.
* For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
•
Position (Only available for VGA input): adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
•
Focus (Only available for VGA input): reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
•
Auto Adjust.: Automatically adjusts the image to its optimized position,
clock, and phase (for VGA mode only).
5.
Sound
Set the sound related setting from this menu.
•
Volume: the adjusting range is from 0 to 100.
•
Mute: toggles the monitor sound between on and off.
•
Source: decides the monitor sound comes from which source.
ASUS VZ27AQ Series LCD Monitor
Sound
Volum e
M ut e
Sourc e
Allows an Adaptive-Sync supported*
:
ASUS VZ27A
Standard Mode
HDMI 1440 x 900 @ 60Hz
3-5
Advertisement
Table of Contents
