1. Manuals
  2. Brands
  3. BEIER-Electronic Manuals
  4. Cables and connectors
  5. AKL-8-W
  6. Operation manual

BEIER-Electronic AKL-8-W Operation Manual

Terminal clamp
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

EN
Terminal Clamp AKL-8-W
Operation Manual
Terminal Clamp
AKL-8-W
BEIER-Electronic
Winterbacher Str. 52/4, 73614 Schorndorf-Weiler
Telephone +49/7181/46232, Fax 07181/45732
eMail: modellbau@beier-electronic.de
Internet: http://www.beier-electronic.de/modellbau
RC-Junky English Conversion
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AKL-8-W and is the answer not in the manual?

Questions and answers

Summary of Contents for BEIER-Electronic AKL-8-W

  • Page 1 Terminal Clamp AKL-8-W Operation Manual Terminal Clamp AKL-8-W BEIER-Electronic Winterbacher Str. 52/4, 73614 Schorndorf-Weiler Telephone +49/7181/46232, Fax 07181/45732 eMail: modellbau@beier-electronic.de Internet: http://www.beier-electronic.de/modellbau RC-Junky English Conversion...
  • Page 2 UFR (speed controller) series to allow an easy connection of LEDs, relays, smoke generators and other consumers to the switching outputs. As a special feature, the AKL-8-W terminal has eight slots for series resistors to simplify the connection for LEDs.
  • Page 3 The connection cables of the consumer/component/light can be connected to the spring-loaded terminals of the AKL-8-W. To insert or remove a cable, just press from above with a small screwdriver on the operating lever of the terminal. This opens the clamp and the cable can be plugged in or out.
  • Page 4 Terminal Clamp AKL-8-W The required value of the series resistor depends on 3 different factors: • Level of the supply voltage (U • Voltage of the LED (U ). Added together when connecting several LEDs in series the individual stresses.

Table of Contents