Table of Contents
Advertisement
Quick Links
x1
ROOF
x2
WOOD DECK
INVENTORY
3 PEOPLE
1
2
With the soft mallet, hammer the white "bumpers" into the top of the bases and the center legs.
x1
"H" BACK
x2
BASES
3
Page 1/8 - 01/2018 - www.egoparis.com
ASSEMBLY INSTRUCTIONS
EM16
BEACH NESTED CABINS
THE VIDEO OF THE ASSEMBLY IS AVAILABLE ONLINE: https://en.egoparis.com/our-videos/
x3
SUPPORT BARS
"H" SHAPE BACK
x1
x2
BASES
x1
SOFT
MALLET
x1
STEPLADDER
In order to protect it, assembly the cabin on the blanket.
"BUMPERS"
WHITE "BUMPERS"
SCREWS
CENTRAL
LEGS
x2
PROTECTIVE CAPS
x1
HEXAGON
KEY SIZE 5
x6
Lay the "H" BACK on the blanket.
x8
x1
TOOL
x4
x4
x1
SOCKET WRENCH
SIZE 10
ROLLERS
x2
x4
x2
x2
x4
x1
THICK BLANKET
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Ego Paris EM16
- Page 1 ASSEMBLY INSTRUCTIONS EM16 BEACH NESTED CABINS THE VIDEO OF THE ASSEMBLY IS AVAILABLE ONLINE: https://en.egoparis.com/our-videos/ ROLLERS SUPPORT BARS WHITE “BUMPERS” “H” SHAPE BACK ROOF TOOL SCREWS CENTRAL LEGS WOOD DECK BASES PROTECTIVE CAPS INVENTORY SOFT MALLET HEXAGON SOCKET WRENCH THICK BLANKET...
- Page 2 The Logo 3 points is on the exterior. The open side for the roller is on the front of the cabin. Place the first base on the “H” back and press the “bumper” into the profile. SCREW M8 TOOL Use the assembly tool: place and tighten the screw M8 into the base in order to fix it on the “H”...
- Page 3 "BUMPERS" Hammer the white “Bumpers” on the central legs, at the opposite of the round and white pieces. CENTRAL LEGS x2 WOOD DECK Place one wood deck on the “H” back. The screws heads must be inside the cabin. Adjust the wood deck’s tube on the round and white piece on the “H”...
- Page 4 On The other side, place the central leg’s white piece into the wood deck’s tube and the “bumper” on the base. Use the assembly tool: place and tighten the screw M8 into the base in order to fix it firmly. SCREW M8 TOOL With the two straps, bind the wood deck and the central leg.
- Page 5 The assembly of the rollers : Insert the spacers into the roller Place the roller into the tube The cap nut must be on the exterior of the cabin. Place a washer under the screw head and a second one between the nut and the base Repeat this for the second roller.
- Page 6 The logo in on the front of the cabin. The assembly of the roof : Embed the “bumpers” in the roof’s profiles. The screws are already inside the structure. TOOL Use the assembly tool, place it on the screw inside the structure and tighten firmly the roof on the 4 profiles.
- Page 7 SUPPORT BARS Place the 3 support bars on the structure. Untie the straps and wrap them around the wood slat. Wind down the two wood decks on the support bars. Don’t pinch your fingers ! Place the 3 shades by sliding the panels between the tubes. Position the mattresses.
- Page 8 Visit our website and read our maintenance advices www.egoparis.com EGO Paris cannot assume responsibility for special, indirect, consequential damages or contingent liability for use of the Beach Nested Cabins in a manner not expressly intended by the manufacturer. The end consumer is ultimately responsible for verifying proper installation of the Beach Nested Cabins according to our guidelines herein.
Need help?
Do you have a question about the EM16 and is the answer not in the manual?
Questions and answers