Advertisement
How to Pay with your Ring2Pay
1. close your hand into a fist
2. place your fist against the active part of the terminal which is
usually indicated by the contactless
acceptance mark as shown on the picture below
3. don't move your hand away from the terminal until you see
the green light or hear the beep to noting a
successful transaction
4. some terminals are less sensitive than others, so you may
have to move your hand around until you find the most re-
ceptive point on the surface
5. if a terminal has a particularily low sensitivity and does not
detect your Ring2Pay easily, simply remove it and hold it flat
against the surface
Advertisement
