Download Print this page

MGA Entertainment Project MC2 Crayon Makeup Kit Quick Start Manual page 2

Advertisement

IMPORTANT NOTE: An adult must melt crayons. Contents are HOT.
Before beginning, cover the play area to prevent possible damage.
1
Mix di erent colors to create
your own unique lipstick!
Place one included crayon wedge
into a small oven safe cup and add
1/2 teaspoon of coconut oil.
3
350
10 min.
Preheat an oven to 350º F
(177º C) for 10 minutes.
5
An adult must wear oven mitts to remove
the tray and cup from the oven. Stir the
mixture until the crayon is fully liquefied.
CAUTION: Contents are HOT!
2
QUICK START
2
Place the oven safe cup on an
oven-safe baking tray.
4
Turn the oven OFF. With oven mitts, an adult
must place the baking tray and cup inside
the oven on a baking rack for three minutes.
6
Quickly pour the wax into the compact.
CAUTION: Contents are HOT!
Make sure the lipstick mold halves are locked together before pouring in the crayon wax.
1
Once the oil and crayons have been
mixed, quickly pour them into the
lipstick mold and put the mold in the
refrigerator for 10 minutes.
3 min.
3
Insert the lipstick into the lipstick tube
and wipe off excess around the base.
CAUTION
: Melted wax crayons are HOT. Always use protective mitts and keep away from skin
until completely cooled.
• Melting wax crayons must be done by an adult.
• Melt crayons in a well-ventilated area. Overheating wax crayons may release irritating fumes.
• Melting crayons in a microwave is not recommended.
• If skin irritation occurs from the lipstick, discontinue use.
• Wash the compact, lipstick tubes, and lipstick mold before the first use and after each additional use.
• To fully remove all excess crayon wax, scrub thoroughly with warm water.
• Air dry only in a well ventilated area before storing.
• Wash hands before applying lip gloss from the compact.
• Adding too much oil may prevent the lipstick from hardening. Add a small piece of crayon and melt again.
• Keep crayons out of direct sunlight and store in a cool area to prevent unwanted melting.
USING THE LIPSTICK MOLD
2
Open the latches on the sides of the
mold and separate the halves.
Gently push the lipstick from the
bottom to release it from the mold.
4
Use on lips, cheeks or eyes for extra color!
IMPORTANT INFORMATION
3

Advertisement

loading

This manual is also suitable for:

545163