Advertisement
Safety instructions
Caution!
Disobeying the following safety instructions might result in serious injuries or damages.
A correct and complete assembly and a correct use are of special importance for they minim -
ise the risk of injuries.
Note that two persons are required for a successful assembly.
Contact the vendor or qualified personnel if there is any technical problem. Do not try to solve
technical problems without having the necessary knowledge.
For cleaning the product, only use soft, dry and clean cloths. Do not use organic solvents,
paints or chemically impregnated textiles.
Always switch off the waterfall before cleaning it or when it is not used.
To prevent any spots and corrosion from forming on the stainless steel surface, a regular
cleaning and maintenance of the waterfall is required.
Make sure that no deposits (such as salt, dirt, etc.) can accumulate on the waterfall and in in-
terstices.
It is recommended that the waterfall be checked and maintained once a year.
Protect the waterfall, pump and hose connection from frost. Remove all parts early enough
and keep them in a frost-proof place
Warning!
When using the waterfall in a swimming pool or swimming pond, make sure that the
power supply does not come into contact with the water. The pump must not be operated with
people present in the water.
Technical specifications
Item №
LED
61460
without
61461
with
61462
without
61463
with
61464
without
61465
with
61466
without
61467
with
61468
without
61469
with
61470
without
61471
with
61472
without
61473
with
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Size (㎜)
Number of intakes
300 × 115 × 80
400 × 115 × 80
450 × 115 × 80
600 × 115 × 80
900 × 115 × 80
1200 × 115 × 80
1500 × 115 × 80
Item 61460–61473
Intake thread size (㎜)
1
33.25 (1")
2
Page 5
04
2021-1
Advertisement
