Additional Information For Edge Troubleshooting; Edge Mode Troubleshooting Differs Slightly From Basic Gsm Troubleshooting - Nokia RH-30 Series Troubleshooting Instructions

Additional information for EDGE troubleshooting

EDGE mode troubleshooting differs slightly from basic GSM troubleshooting.

ICQ: 343183001 QQ: 35070846 Email: Serviceic@yahoo.com.cn
Establish connection to the phone normally (see GSM850/900/1800/1900 troubleshooting in-
structions).
Select product from the menu:
File -> Choose Product -> RH-30/RH-31
From toolbar set operating mode to "Local"
Activate RF controls window from the menu:
Testing -> RF Controls
From the RF controls window:
Select Band "GSM850" , "GSM900" or "GSM1800" or "GSM1900" (Default = "GSM900" RH-30,
Default= "GSM850" RH-31)
Set Active unit to "Tx" (Default="Rx")
Set Edge "On" (Default="Off")
Set Operation mode to "Burst" (Default="Burst")
Set Tx data type to "Alternate PN9" (Default="All1")
Set Rx/Tx channel to 190 on GSM850, 37 on GSM900 or 700 on GSM1800 or 661 on
GSM1900 (Defaults)
Set power level to 8 (Default = 19) on GSM850 and GSM900 or to 2 (Default = 0) on GSM1800
or GSM1900
NOTE! For GSM850/900 Edge power levels 5, 6 and 7 are not in use and for GSM1800&1900 Edge
power levels 0 and 1 are not in use.