Page 1
LuxFold TB D AVIES Always within reach FITTING INSTRUCTIONS PLEASE WATCH INSTALLATION VIDEO BEFORE STARTING. SCAN WITH PHONE OR VISIT: HTTPS://WWW.TBDAVIES.CO.UK/LOFT-LADDER-INSTALLATION-VIDEO/ TBD_V1.1...
WARNING! Please be aware of all the safety warnings and be sure that you fully understand them before handling the product. It would be advisable to watch the TB Davies Loft Ladder installation video prior to fitting. This can be found on www. tbdavies.co.uk/loft-ladder-installation-video.
Whats in the box A x1 B x2 C x2 D x1 TB Davies For help or assistance, please call: 029 2132 0000...
Page 4
We recommend installing the TB Davies Balustrade Kit to Ensure adequate lighting, particularly where detailed secure the loft opening and prevent falls into the space or intricate work, is required.
Page 5
Temporarily screw two planks of wood onto the frame to support the loft ladder housing unit whilst affixing it to the beams in the loft. * Please seek professional advice if cutting across joists. TB Davies For help or assistance, please call: 029 2132 0000...
Page 6
No. 1 and into the joists, make ten 6mm holes at intervals shown in the diagram. Then use the wood screws (not supplied) to affix the frame into position. For help or assistance, please call: 029 2132 0000 TB Davies...
Page 7
Saw off the excess piece of the ladder on both sides. Attach the two rubber feet to the base of each leg. TB Davies For help or assistance, please call: 029 2132 0000...
Page 8
With ladder in open position, use 2 x 13mm spanners to make final adjustments and reduce the flex of the ladder. Repeat procedure on opposite side For help or assistance, please call: 029 2132 0000 TB Davies...
Page 9
68°- 72° Max. TB Davies For help or assistance, please call: 029 2132 0000...
TB Davies (Cardiff) Ltd, Lewis Road, Cardiff, CF24 5EB. +44(0)29 2132 0000 www.tbdavies.co.uk. Registered in England No. 00534073, VAT Reg No. GB134144207 Awarded Silver by Investors in People, 2018. An ISO 9001 Registered Company. Members of the Ladder Association and PASMA.
Need help?
Do you have a question about the LuxFold and is the answer not in the manual?
Questions and answers