GRAVITY MS CLMP 34 Quick Start Manual

MS CLMP 34
HANDHELD WIRELESS MICROPHONE CLIP
SAFETY INFORMATION
1. Please read these instructions carefully before
you start installation
and assembly.
2. Keep all information and instructions in a safe
place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove
safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and
protect yourself from injury.
6. This product is intended for indoor use only.
Using it outdoors could lead to product failure
and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in
your country. During disposal of packaging,
please separate plastic and paper/card-
board.
9. Plastic bags must be kept out of reach of
children.
10. If you have any questions refering to this
instruction or any warnings, please contact
your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION
OF LIABILITY
You can find our current warranty conditions and
limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MAN-
UFACTURERS-DECLARATIONS_GRAVITY.pdf
To request warranty service for a product, please
contact Adam Hall GmbH, Adam-Hall-Str. 1, 61267
Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT)
(Valid in the European Union and other
European countries with waste separation)
This symbol on the product, or the documents
accompanying the product, indicates that this ap-
pliance may not be treated as household waste.
This is to avoid environmental damage or personal
injury due to uncontrolled waste disposal. Please
dispose of this product separately from other waste
and have it recycled to promote sustainable
economic activity.
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
FEATURES
• Firmly holds wireless microphones with shaft
diameters from 34 to 42 mm
• Fits all mic stands and boom arms
• Tilt head for optimum mic positioning with
adjustable tensioning screw
• Unbreakable plastic material
• 3/8" adapter included
DESCRIPTION
This microphone clip acommodates most hand-
held wireless microphones with shaft diameters
ranging from 34 to 42 mm. Made of unbreakable
high-quality elastic material, it firmly holds your
mic and tilts for perfect positioning. The clip has a
standard 5/8" female thread and includes a 3/8"
adapter to fit all mic stands and boom arms.
SPECIFICATIONS
Product type
Type
Material
Threaded
connector
Microphone mount
(diameter)
Joint
Weight
Other features
Black ring pack
included
Microphone Acces-
sories
Microphone Clip
plastic
5/8 "
34 - 42 mm
screw-on
0,062 kg
3/8" Adapter for
Microphone Stands
yes