Summary of Contents for Balboa 59060
- Page 1 INSTALLATION INSTRUCTIONS AND MAINTENANCE MANUAL BALBOA ULTRAVIOLET SANITITION SYSTEMS MADE IN THE USA BALBOA WATER GROUP 1382 BELL AVE - TUSTIN - CA - 92780 – USA www.balboawater.com Rev. 04/12/2016-02...
- Page 2 Introduction: Balboa UV Sanitation Systems were designed by Balboa, the leader in reliability in spa controls for over 20 years. These compact sanitizers were created specifically to withstand the demanding environment of the hot tub. Dimensions: III. Specifications: MODEL SYSTEM...
- Page 3 Plumbing: Use 3/4” clear flexible hoses & 3/4” hose clamps for both inlet and outlet connections. This unit can be plumbed with one of the bellow options: Option 1: Option 2 Option 3: Rev. 04/12/2016-02...
- Page 4 VII. Electrical Connections: Danger: Turn the spa breaker to OFF position. This unit must be connected to dedicated UV/Ozone mating connector on the spa controller’s circuit board. A splitter (PN: 22934 – Not included) may be required if a separate ozone is being used. Electrical ratings are shown on the product label.
- Page 5 Turn the breaker back on. Turn on the pump to circulate the water through the unit. Wait for 5 minutes and assure no water is dripping. If water is visible, STOP, fix the leak by repeating the quartz tube maintenance process from step (a) to step (r).