Zanussi ZOHEA3X1 User Manual page 24

Step 1 Turn off the oven and wait until it
is cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.
HOW TO USE: AQUA CLEAN
This cleaning procedure uses humidity to remove
remaining fat and food particles from the oven.
Step 1 Pour water into the cavity emboss-
ment: 300 ml.
Step 2
Set the function:
HOW TO REMOVE AND INSTALL: DOOR
The oven door has two glass panels. You can remove the oven door and the internal glass panel to clean it.
Read the whole "Removing and installing door" instruction before you remove the glass panels.
CAUTION! Do not use the oven without the glass panels.
Step 1 Open the door fully and hold both
hinges.
Step 2 Lift and turn the levers fully on both
hinges.
Step 3 Close the oven door halfway to the first
opening position. Then lift and pull for-
ward and remove the door from its
seat.
Step 4 Put the door on a soft cloth on a stable
surface.
24
.
1
Step 3 Set the temperature to 90 °C.
Step 4 Let the oven work for 30 min.
Step 5 Turn off the oven.
Step 6 Wait until the oven is cold. Dry the
cavity with a soft cloth.
2