Advertisement
CPAP CLEANER
CPAP CLEANER
READ AND FOLLOW ALL INSTRUCTIONS FOR SAFE AND EFFECTIVE CLEANING OF CPAP HOSE,
MASK & WATER RESERVOIR. FAILURE TO FOLLOW INSTRUCTIONS CAN CAUSE SERIOUS INJURY.
SAVE ALL PACKAGING, INSTRUCTIONS AND COMPONENTS INCLUDED WITH THIS PRODUCT.
Sharper Image
CPAP Cleaner is intended to clean Continuous Positive Airway Pressure (CPAP) Hose, Mask and
®
Water Reservoir using bacteria and germ killing activated oxygen (Ozone). It is intended for home use.
Itʼs recommended that you clean your CPAP Hose and Mask daily. Water Reservoir should be cleaned weekly.
Discontinue use of the CPAP Cleaner if acne or rash develops along mask contact line.
The CPAP Cleaner will not remove skin oils and mucus. To remove these fluids, you can wipe down your
equipment with CPAP Cleaner wipes or other methods of cleaning as directed by your equipment manufacture.
Step 1. Connect the USB charging cord to CPAP Cleanerʼs USB Port (Figure 1).
Step 2. Connect the other end of charging cord into USB charging port (Figure 2) or wall outlet using a 5 volt 1 amp.
USB power adapter commonly used for cell phones and other small electronics (Figures 3-4) .
Step 3. Charge unit until
Figure 1
Note: Do not start cleaning cycle when battery is low. The CPAP Cleaner will beep during operation if the charge
is low. If unit beeps during operation, press the ON/OFF Button 1 time to turn off the CPAP Cleaner and recharge.
Note: Do not operate the CPAP Cleaner when charging.
Warning: Do not operate the CPAP Cleaner when detached from hose. If the CPAP Cleaner is
accidentally turned on when hose is not connected, press the On/Off Button 1 time to
turn off the CPAP Cleaner.
DAILY CLEANING HOSE, MASK AND REMOVABLE
WATER RESERVOIR USING CLEANING ZIP BAG:
Step 1. Disconnect CPAP hose with mask from CPAP machine and attach to the CPAP Cleaner Hose Port (Figures 6 & 7).
If hose does not fit in Hose Port snuggly, use one of the 2 White Universal Fit Adapters (Figure A) so there
are no leaks.
OPERATING INSTRUCTIONS
M A K E S CLE A NIN G YO UR CPA P A BR E EZ E!
CHARGE YOUR CPAP CLEANER BEFORE USE:
on start button turns from red to green (Figure 5).
Figure 2
Figure 6
Figure 3
Figure 4
5 Volt
1 Amp
USB
adapter
(not
included)
Figure 7
Figure A
PAGE 1
Figure 5
Green-Charged
Red-Not Charged
Universal Fit CPAP
Hose Adapters
Advertisement
Table of Contents
Related Manuals for Sharper Image CPAP CLEANER
Summary of Contents for Sharper Image CPAP CLEANER
- Page 1 WATER RESERVOIR USING CLEANING ZIP BAG: Step 1. Disconnect CPAP hose with mask from CPAP machine and attach to the CPAP Cleaner Hose Port (Figures 6 & 7). If hose does not fit in Hose Port snuggly, use one of the 2 White Universal Fit Adapters (Figure A) so there are no leaks.
- Page 2 Step 1. Disconnect Mask from CPAP hose Step 2. Connect CPAP hose to the CPAP Cleanerʼs Hose Port (Figure 13). If hose end does not fit snuggly, attach hose to one of the 2 Universal Fit Adapters and attach adapter end into the CPAP Cleanerʼs Hose Port (Figure 13).
- Page 3 Never use the CPAP Cleaner in confined spaces less than 120 square foot (10' x 12') room with 8' ceiling. Never use the CPAP Cleaner when itʼs outside of Cleaning Zip Bag. If a strong ozone odor is detected when the CPAP Cleaner is operating, turn off the CPAP Cleaner by pressing the on/off button 1 time.
- Page 4 Can I travel with the CPAP Cleaner on airlines? The power capacity of the lithium ion battery meets FAA/TSA requirements. The CPAP Cleaner canʼt be packed in stored luggage during travel. The CPAP Cleaner must be carried onto plane. What is the blue bag with zipper for? The blue bag serves as a storage bag for the CPAP Cleaner unit, accessories, CPAP Hose and Mask when not in use or when you travel.
Need help?
Do you have a question about the CPAP CLEANER and is the answer not in the manual?
Questions and answers