Download Print this page

Turning On And Off; Brightness Adjustment - Madrigal STILOSA Quick Start Manual

Advertisement

ENGLISH

TURNING ON AND OFF

The lamp is turned on and o
the touch surface of the lamp shade.

BRIGHTNESS ADJUSTMENT

When the lamp is turned on, hold your finger on the
touch surface of the lamp shade until the desired
brightness is reached. When turned on, the lamp
returns to the maximum brightness of 100%.
RECHARGING
To recharge the lamp, lift the protective cover
under the lamp shade and connect the provided
micro USB cable to a standard USB charger. A red
light indicates the charging status of the lamp.
Charging is complete when the light turns green.
Charge the product completely before first use. Use a 5V - 2A (10W) char-
ger like the one provided to charge the lamp in order to reduce wait time.
The batteries last up to 500 charge cycles and can be replaced by our after-
sales service which is available on the www.madrigal-design.com website.
When the lamp has not been used for a long time, we recommend you
perform a series of charge and discharge cycles and we recommend that the
battery not be allowed to go below 20% charge. When the silicon cover of
the USB connector is closed, the lamp achieves an IP54 level of protection
U S E O F T H E S T I L O S A L A M P
with a quick tap on
T I P S A N D M A I N T E N A N C E
and is suitable for external use.
Clean the lamp with a clean and dry cloth.
3
STILOSA TONDA
ON/OFF
RAPID TOUCH
DIMMER
PROLONGED TOUCH
USB CONNECTOR
MADRIGAL-DESIGN.COM

Advertisement

loading