USER MANUAL JEFSUBPIDW210-12 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V ABOUT THIS DOCUMENT This manual has been compiled by Jefferson Tools and is an integrated part of the product with which it's enclosed and should be kept with it for future reference. Please read all of the information supplied in this User Manual before operating this product.
USER MANUAL JEFSUBPIDW210-12 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V EQUIPMENT IDENTIFICATION 1. 2" Outlet / Discharge Hose Connection 2. Power Cable & Plug 3. Carry Handle 4. Motor Casing 5. Float Switch 6. Base SAFETY GUIDELINES Read and ensure that you understand all of the operating instructions, safety precautions and warnings in this Instruction Manual before operating or maintaining this equipment.
Page 4
USER MANUAL JEFSUBPIDW210-12 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V SAFETY GUIDELINES • Check that all equipment cables are secure, correctly insulated, free from damage, and protected against short circuit and overload before connecting to the power supply. Do not use worn or damaged cables, plugs, sockets or other fittings.
USER MANUAL JEFSUBPIDW210-12 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V OPERATION 1. Fit the appropriate discharge pipe to pump outlet and secure with a clip. 2. Ensure the diameter of the discharge pipe is the same as or greater than the outlet diameter, as a smaller pipe will adversely effect the pump flow rate.
USER MANUAL JEFSUBPIDW210-12 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V PARTS LIST Description Description Bolt Bearing Washer Thermal Protector Protector Stator Cable Presser Mechanical Seal Washer "O" Ring Screw Washer Handle Connection Part Screw Screw Flange "O" Ring Cable Protector Bolt...
USER MANUAL JEFSUBPIDW210-12 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V ENVIRONMENTAL PROTECTION Recycle any packaging and unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
RoHS Directive Equipment Category: Water Pump Product Name/Model: JEFSUBPIDW210-12 - 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V Notified Body Ente Certificazione Macchine Srl Via Ca’ Bella, 243 – Loc. Castello di Serravalle – 40053 Valsamoggia (BO) - ITALY +39 051 6705141 +39 051 6705156...
Page 10
3 months after the initial sale to the distributor. 1 Year • JEFSUBPIDW210-12 - 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V 90 Days • All replacement parts purchased outside of the warranty period Important: All parts used in the repair or replacement of warranty covered equipment will be subject to a minimum of 90 days cover or the remaining duration of the warranty period from the original date of purchase.
Page 11
USER MANUAL JEFSUBPIDW210-12 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V Claiming Warranty Coverage The end user must contact Jefferson Professional Tools & Equipment (Tel: +44 (0) 1244 646 048) or their nearest authorised Jefferson dealer where final determination of the warranty coverage can be ascertained.
Page 12
USER MANUAL JEFSUBPIDW210-12 500W INDUSTRIAL SUBMERSIBLE WATER PUMP 110V IMPORTANT! SAFETY FIRST! Before attempting to use this product please read all the safety precautions and operating instructions outlined in this manual to reduce the risk of fire, electric shock or personal injury.