Chamberlain 14100 Quick Start Manual
Chamberlain 14100 Quick Start Manual

Chamberlain 14100 Quick Start Manual

Lighted warning sign

Advertisement

Available languages

Available languages

SPECIFICATIONS

Power Supply: 120 Vac to 12 Vdc transformer (provided)
Dimensions:
Height - 28 7/8", Width - 22 1/4", Depth at Top - 4 /18", Depth
at Base - 3 3/8"

INSTALL

1.
Disconnect all power.
2.
Screw the spot light into the bottom of the lighted sign and point the
spot light toward the spike strip.
3.
Install the transformer. NOTE: Only use transformer provided. The
transformer must be located in a dry location that is protected from
weather conditions, such as inside a weather proof enclosure (not
provided).
4.
Run low voltage wire between the lighted sign and the 12V output of the
transformer. NOTE: Never run low voltage wires and high voltage wires
in the same conduit. Connect wires using wire nuts within the electrical
box.
5.
Plug the transformer into a dedicated outlet.
6.
Reconnect power.

1 YEAR LIMITED WARRANTY

LiftMaster
®
warrants to the first consumer purchaser of this product that it is
free from defect in materials and/or workmanship for a period of 1 year from
the date of purchase.
Dedicated Outlet
Transformer
Weather Proof Enclosure
for Transformer
LIGHTED WARNING SIGN
To reduce risk of fire or to prevent possible SERIOUS INJURY or DEATH:
• Disconnect ALL electric and battery power BEFORE performing ANY
service or maintenance.
• Turn off or unplug and allow the lamp to cool BEFORE replacing the
lamp.
• Lamp gets hot quickly! ONLY touch the switch/plug when turning the
lamp on or off.
• DO NOT touch the hot lens, guard, or enclosure.
• Keep lamp away from materials that may burn.
• DO NOT touch the lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
• DO NOT operate the luminaire fitting with a missing or damaged shield.
• To AVOID damaging gas, power, or other underground utility lines,
contact utility locating companies BEFORE digging.
• ALL electrical connections MUST be made by a qualified individual.
• Fixture(s) MUST be installed in accordance with ALL local codes and
ordinances.
• DO NOT install within 10 feet of a pool, spa, or fountain.
• DO NOT use ANY power supply other than those supplied with this
product.
• DO NOT connect the power supply to the 120 Vac outlet until ALL
wiring is completed.
WARNING: This product can expose you to chemicals including
lead, which are known to the State of California to cause cancer or
birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov
Electrical
Box
Low Voltage
Wire (12 V)
Conduit
MODELS 14100 AND 14115
Sign
Frame
Spot Light

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 14100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Chamberlain 14100

  • Page 1 LIGHTED WARNING SIGN MODELS 14100 AND 14115 SPECIFICATIONS Power Supply: 120 Vac to 12 Vdc transformer (provided) To reduce risk of fire or to prevent possible SERIOUS INJURY or DEATH: Dimensions: Height - 28 7/8", Width - 22 1/4", Depth at Top - 4 /18", Depth at Base - 3 3/8"...
  • Page 2 AFFICHE D’AVERTISSEMENT ILLUMINÉE MODÈLES 14100 ET 14115 CARACTÉRISTIQUES Alimentation électrique : Transformateur de 120 V c. a. à 12 V c. c. (inclus) Pour réduire les risques d’incendie et prévenir la possibilité d’une GRAVE Dimensions : Hauteur - 58,1 cm (28 7/8 po), largeur - 56,1 cm BLESSURE ou d’un DÉCÈS :...

This manual is also suitable for:

14115

Table of Contents