Advertisement
Loading the Tape Gun
1. Push the holding bar downwards into the locking position.
2. Remove the blade protector.
3. Remove the locking bar and place the tape in position.
4. Pull the adhesive tape end down and around the roller.
5. Put the locking bar into the slot and turn 180 degrees to lock.
6. Push the tape roll downwards to release the holding bar from
locking position. The tape gun is ready to use.
5
Take off the
blade protector.
6
How to Use
A) Press tape firmly on to the side of the box.
B) Glide tape gun along the top of the box and continue down to
the opposite side.
C) Tilt the Tape Gun forwards to cut the tape.
B
A
3/4
C
D
4/4
Advertisement
