Download Print this page

Qiagen QIAsphere Base Quick Start Manual

Connectivity package
Hide thumbs Also See for QIAsphere Base:

Advertisement

December 2020
QIAsphere
Connectivity Package
Quick Start Guide
Sample to
Insight__

Advertisement

loading

Summary of Contents for Qiagen QIAsphere Base

  • Page 1 December 2020 QIAsphere Connectivity Package Quick Start Guide Sample to Insight__...
  • Page 2: Table Of Contents

    Contents Introduction ........................ 3 Safety Information ....................... 4 External Feature of QIAsphere Base ................5 Site Requirements ....................... 6 Installation Procedure ....................6 QIAsphere Cloud Mode Setup ................7 QIAsphere Local Mode Setup ................11 QIAsphere Connectivity Package Quick Start Guide 12/2020...
  • Page 3: Introduction

     mode. QIAsphere App can access the QIAsphere Cloud from anywhere, whereas local mode can only be used if the QIAsphere Base with associated instruments and App are within the same local network. Monitor instrument status with mobile devices or from desktop PC – In addition to the ...
  • Page 4: Safety Information

    Safety Information Before installing or using the QIAsphere Base, it is essential that you carefully read the user manual provided by the hardware supplier, Eurotech, and pay attention to their safety information. The instructions and safety information in this user manual must be followed to ensure safe operation of the instrument and to maintain the instrument in a safe condition.
  • Page 5: External Feature Of Qiasphere Base

    External Feature of QIAsphere Base Front View of QIAsphere Base Rear View of QIAsphere Base Status LEDs: User1, User 2, Two USB ports User 3, and User 4 Power LED: Blue LED Service panel (includes microSD card slot, factory reset...
  • Page 6: Site Requirements

    Site Requirements QIAsphere Base must be connected to the same network as QIAsphere-ready instruments are intended to be connected to. QIAsphere Base does not need to be located in close proximity to enable proper connection. In cloud mode, the device (mobile device or desktop PC) running the QIAsphere app is network independent.
  • Page 7: Qiasphere Cloud Mode Setup

    • My QIAGEN account: Sign up on www.qiagen.com/myqiagen • QIAsphere License: On My QIAGEN account, go to QIAsphere Administration Note: If license already exists, the main screen is displayed. If license does not exist, you can request for it. •...
  • Page 8 9. Remove the cable between PC and ETH0 port. * QIAsphere Base Setup Portal. QIAsphere Base uses self-assigned certificate. Therefore, the browser may issue a security warning. Ignore the warning or add an exception to access QSBP. ** Most Ethernet networks support automated IP address assignment using DHCP. In some special cases, networks do not support DHCP.
  • Page 9 Connect QIAsphere Base to Cloud 1. Make sure your PC is connected to the same local network as the QIAsphere Base is connected to. 2. On your PC web browser (e.g., Chrome or Mozilla Firefox) open QBSP by entering https:// followed by the QIAsphere Base IP address, e.g. https://192.168.1.10.
  • Page 10 2. Go to Workgroups menu and click Add Workgroup button. 3. Enter the workgroup name as prompted and click Add. 4. Go to Instruments menu and select a relevant instrument or QIAsphere Base. 5. Click on the pencil icon to edit instrument details.
  • Page 11: Qiasphere Local Mode Setup

    QIAsphere Local Mode Setup Requirements on Site • QIAsphere App and Certificate (installed on mobile device) Note: Mobile app can be downloaded from the app store while the App certificate can be downloaded from www.qiagen.com/qiasphere. QIAsphere Connectivity Package Quick Start Guide 12/2020...
  • Page 12 9. Remove the cable between PC and ETH0 port. * QIAsphere Base Setup Portal. QIAsphere Base uses self-assigned certificate. Therefore, the browser may issue a security warning. Ignore the warning or add an exception to access QSBP. ** Most Ethernet networks support automated IP address assignment using DHCP. In some special cases, networks do not support DHCP.
  • Page 13 Connect QIAsphere App to QIAsphere Base 1. Make sure that the mobile device is connected to the same local network as the QIAsphere Base is connected to. 2. Launch the app and skip log in by clicking Continue in local mode.
  • Page 14 (Bluetooth SIG, Inc.). Registered names, trademarks, etc. used in this document, even when not specifically marked as such, are not to be considered unprotected by law. HB-2842-002 12/2020 1123037 © 2020 QIAGEN, all rights reserved. Ordering www.qiagen.com/shop | Technical Support support.qiagen.com | Website www.qiagen.com...