Related Manuals for Aras GSM2ACCESS V4
Summary of Contents for Aras GSM2ACCESS V4
- Page 1 GSM2ACCESS V4 Manual Version Change Author First version Søren Due Version 1.0 – Søren Due – 30.11.2017 page 1/4...
- Page 2 GSM2ACCESS V4 The GSM2ACCES V4 comes with new functionality which makes it possible for the unit to answer the phone, and listen for key-presses. The unit can be looked at as a normal card reader, where the card presented is the phone-number of the incoming call.
- Page 3 Terminal block Terminal Function Data 0 Data 1 IN 0 IN 1 NOX Specific Tip: Please make sure not to use PIN 1 on the CMU to supply the unit. The unit has a high peak current when calls are initiated. On the CMU you can use the BUS supply voltage, or an external supply. If an external power supply is used, please remember to connect ground on the Wiegand controller with the external supply’s ground to make sure the Wiegand signals work correctly.
- Page 4 SD-Card In listening mode, the SD card will be needed to play sound files for the user. There are 5 sound files needed, and they can be replaced if needed. It’s important that the files are moved to the SD card in the correct sequence 1 by 1. So, delete all files and the copy file 01, then file 02… etc. File in mp3 format Message Welcome message...