Page 2
The information in this User Guide is believed to be accurate and reliable for use and operation of the control system, however, PendoTECH assumes no responsibility for the use of this product except for what is covered in the Limited Warranty and Terms and Condition of Sale.
PendoTECH Handheld Pressure Monitor Model PMAT-DPG Revision 0 Table of Contents Overview of the Handheld Pressure Monitor Components Supplied DPG Details Using the Device Explanation of Functions Appendix A: Product Warranty...
Reads PendoTECH Single Use Pressure Sensors • Convenient handheld design • Battery operated • No calibration required when used with the PendoTECH Single Use Pressure Sensors • One-touch button for sensor tare at 0 psi • Minimum / maximum pressure display buttons •...
Reads sensors to their specification of 0-6 psi +/- 2% of Accuracy reading; 6-30 psi +/- 3% of reading Up to 4 times per second Display Update 9V DC battery (alkaline recommended) Power Supply Typically 15 hours Battery Life 10 minutes (Contact PendoTECH for instructions to Auto Shut Off modify)
Page 6
PendoTECH Handheld Pressure Monitor Model PMAT-DPG Revision 0 3.2. Front Panel Overview Legend: 1) PSI Lettering 4) On/Off Button 2) Max Button 5) Tare Button 3) Min Button...
PendoTECH Handheld Pressure Monitor Model PMAT-DPG Revision 0 • On/Off Button: Used to turn on or off device. • Max Button: Displays maximum value in memory. Hold pressed for 3 seconds to reset memory. Cycling power also resets stored memory values.
PendoTECH’s advertisements, brochures, promotional material, or statements made by employees or sales representatives of PendoTECH are solely for general informational purposes only and are not binding upon PendoTECH. No employee or sales representative of PendoTECH shall have any authority to establish, expand or otherwise modify PendoTECH’s warranty associated with the sale of Goods.