Page 1
Console options and accessories Up to two consoles can be connected. The two consoles can be a mix of SCC with an HBC or HBC2, or alternatively connect an SCC3 with an HBC3. You cannot mix an SCC, HBC and HBC2 with an SCC3 or HBC3.
Page 2
In the interests of safety, the user must be asked to test the vehicle when the installation is receipt of equipment if any damage or shortages are found complete. (customer.support@sepura.com). No consoles or accessories are shipped in the box with the transceiver except the Installation Guidelines and Recommendations Power Cable Assembly and the Transceiver Mounting Kit.
Page 3
as electromagnetic systems or AM/FM radios. One end of the remote console cable is The dash mount bracket should be fixed to a suitable surface, using the three screws plugged into the 16-way header on the rear of the Standard Console (or Interface & provided.
Page 4
Customising/Programming the Mobile Radio If you are installing an Interface and Handsfree Box revision 2.0 or later with HBC (not HBC2/HBC3), disconnect the Remote PTT Red Wire from the Remote PTT connector. To customise or re-program the internal software in the mobile radio you will need the...
Need help?
Do you have a question about the HBC and is the answer not in the manual?
Questions and answers