Download Print this page

Probrite ARM Installation, Usage, & Care Manual page 3

24” mounting arm

Advertisement

Installation
1
For best results
Attach the mounting bracket clip (in
2 parts) (DD) to the extension arm by
Interlocking the bracket and placing
the bolt through the center hole and
tighten with the nut.
Leave approximately one inch of the
extension arm protruding out of the
bottom of the bracket. (Fig. 1)
Place the extension arm assembly onto
the desired mounting surface and mark
the four holes locations required for
mounting.
Remove the arm assembly and drill
the four marked locations. Place the
assembly on the location again and
mount the extension arm using the hex
head lag bolts (AA) and washers (BB)
provided through the mounting clip
(DD). Tighten bolts using the wrench
until arm is secured to the mounting
surface. (fig.2)
Feed supply wires through the arm
and make wiring connections to the
light fixture. Use wire nuts or suitable
connectors for the wire connections.
Follow wiring instructions provided
with the fixture being installed.
Visit www.probrite.com/install for installation video tutorials and product support
DD
x4
BB
x4
AA
DD
WARNING: Before handling electrical wires,
turn the power off at the circuit breaker or
fuse. Place tape over the circuit breaker switch
and verify power is off.
4
Care and Cleaning
To prolong the original appearance, clean the extension arm with clear water and a
soft, damp cloth only.
Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints,
solvents, or any other chemicals on this light fixture. They could cause a premature
deterioration of the aluminum and may void the warranty.
5-Year Limited Warranty
This is a limited warranty offered by Probrite for a period of five years from the date of purchase
to its customers. Probrite warrants to customers that the products will be free from defects
in material and workmanship. The obligation of Probrite under this warranty is limited to the
provision of replacement of products and is extended to the original purchaser of the product
on presenting valid purchase receipt or other proof of date of original purchase acceptable to
Probrite. The receipt is required for rendering the warranty performance. Any warranty claims
without original proof of purchase would not be accepted.
It should be noted that the warranty does not apply to Probrite products that have been
altered or repaired by unauthorized personnel, have been subjected to neglect, abuse, misuse
or accident or damages caused during shipping. Any other products not manufactured by
Probrite which have been supplied, installed and/or used in conjunction with Probrite products
are not covered under this warranty. Any damages caused by replacements bulbs, LEDs or
corrosion or discoloration of brass components are also not covered by this warranty.
Limitation of Liability:
In no event Probrite shall be liable for indirect, consequential, incidental or special damages, or
lost profits. Probrite is not liable for any claims or damage arising out of or connected with the
manufacture, sale, delivery, use, maintenance and repair or modification of Probrite products,
or supply of any replacement parts that, exceed the purchase price of Probrite products giving
rise to a claim. Labor charges to remove or install the fixtures will not be accepted.
To Claim:
Please contact PROBRITE customer service at 1-844-507-5651 or email support@PROBRITE.
com and include your name, address and contact number, along with a copy of the purchase
receipt and a brief description of the problem.
Please call 1-844-507-5651 or email support@probrite.com for further assistance.
5
PROBRITE.COM

Advertisement

loading

This manual is also suitable for:

Arm24-slv103-19900004-1