Advertisement
Table of Contents
Oyster Vision 3 Quickstart and
Quickstart and Troubleshooting procedures
Follow these instructions if your
find the satellite or produces a weak signal
or produces a weak signal. A system in perfect working order
and in a strong signal area should
in a strong signal area should locate the satellite in about 3 - 6 turns.
Firstly, confirm that the Oyster searches for the "Optus D3" satellite. This
Firstly, confirm that the Oyster searches for
should be displayed while in search mode. If not, change it in the satellite
should be displayed while in search mode. If not, change
menu; see your user manual for details.
see your user manual for details.
Secondly, please confirm that the
your area.
Above is a picture of an LNB in
Above is a picture of an LNB in
the parking position. Notice the
the parking position. Notice the
2 coax cables pointing to the 9
2 coax cables pointing to the 9
o'clock
o'clock
position.
position.
should move into this position
should move into this position
when the dish is retracting AND
when the dish is retracting AND
move out of that position when
move out of that position when
the dish is opening. This is
critical!
With the movement of the LNB
Buttons from left to right:
from left to right: Dish, Left Arrow, Righ Arrow, Tick
our Oyster is not behaving as it should, does not
that the LNB skews into the correct position for
LNB skews into the correct position for
Above is a picture of an LNB in the 7
Above is a picture of an LNB in the 7
o'clock position, which is the correct
o'clock position, which is the correct
position
position
Australia.
The
The
LNB
LNB
Note that the LNB position is different
Note that the LNB position is different
for different regions. The position for
for different regions. The position for
Perth e.g. is around 5:30
This is
the LNB confirmed retract the system and perform a
A system in perfect working order
for
for
the
the
East
East
does not
6 turns.
. This
satellite
Coast
Coast
of
of
perform a
Advertisement
Table of Contents
Summary of Contents for SmartSat Oyster Vision 3
- Page 1 Oyster Vision 3 Quickstart and Quickstart and Troubleshooting procedures Follow these instructions if your our Oyster is not behaving as it should, does not does not find the satellite or produces a weak signal or produces a weak signal. A system in perfect working order...
- Page 2 "Oyster Vision 3". If “Oyster Vision 3” is not . If “Oyster Vision 3” is not displayed, change it to “Oyster Vision 3” displayed, change it to “Oyster Vision 3” by pressing the Right Arrow by pressing the Right Arrow button. Press the Tick button...
Need help?
Do you have a question about the Oyster Vision 3 and is the answer not in the manual?
Questions and answers