Advertisement
Safety / Intended use
The Pronomic V-Array flying frames were developed exclusively for
professional use.
Musikhaus Kirstein GmbH assumes no liability for damages resulting from
improper use.
Check the flying frame and all included parts before each assembly for safe
operation (visible damage and wear, functionality)
The flying frames Pronomic V-Array 104 and Pronomic V-Array 204 may
only be used for Pronomic V-Array systems.
This manual describes how to use the flying frames of the Pronomic V-Array
series. Any other use is considered improper and can lead to personal injury
and material damage.
Unauthorized changes or modifications to the flying frame are not permitted.
There is danger to life!
Pronomic V-Array 104 and Pronomic V-Array 204 flying frames may only be
used and operated by trained and qualified personnel. They must check the
flying frames for suitability before each use.
The flying frames must be taken out of operation immediately as soon as
visible damage to the flying frames or individual parts is apparent.
The attachment points, such as crossbars, ceilings, etc. must be checked for
full stability and load-bearing capacity before installing the Pronomic V-Array
104 and Pronomic V-Array 204 flying frames.
The Pronomic V-Array 104 flying frame is designed for 16 elements
(Pronomic V-Array 104 TP top) and the Pronomic V-Array 204 flying frame is
designed for 12 elements (Pronomic V-Array 204 TP top). This load capacity
must never be exceeded!
When installing the speakers, make sure that neither the power supply
cables nor any other speaker cables are pinched or twisted. The respective
national electrical engineering regulations and provisions apply.
Make sure that there are no persons in the immediate vicinity of the
installation site.
3
Please observe the following safety instructions to avoid
risks!
V-Array Flugrahmen
Advertisement
