Whittier Wood Furniture 114Wa Chef's Dropleaf Island Assembly Instructions Manual

Advertisement

Quick Links

Model #
114Wa
Chef's Dropleaf Island
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions and Finishing Hints
before you begin your project.
CALL US FIRST!
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
800-653-3336
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
• Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only.
for commercial use.
Do not climb, sit or stand on this piece of furniture.
Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
If you choose to use the top for food preparation, it
should be finished with a non-toxic substance such
as mineral oil or butcher block oil.
.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40° to 90° (not on a
cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
This assembly requires two people.
Do not return this item to the store.
To Order: Provide the furniture model number (upper
left corner of this page), the part letter, production
code, quantity needed, reason for replacement, your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
Production Code:
VN
Not recommended
.
Rev. 11/09

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 114Wa Chef's Dropleaf Island and is the answer not in the manual?

Questions and answers

Summary of Contents for Whittier Wood Furniture 114Wa Chef's Dropleaf Island

  • Page 1 Model # 114Wa Chef’s Dropleaf Island Assembly Instructions IMPORTANT NOTES: For normal household use only. Not recommended for commercial use. Do not climb, sit or stand on this piece of furniture. Before you begin your project, completely read the Assembly Instructions and Finishing Hints. If you choose to use the top for food preparation, it should be finished with a non-toxic substance such as mineral oil or butcher block oil.
  • Page 2: Top Assembly

    114Wa Chef’s Dropleaf Island — Parts List Before yuu begin this assembly, identify each part and make sure the quantities received match what is on this list. If you need to replace a part, please refer to the following list for its name and letter code. Top Assembly A –...
  • Page 3: Special Instructions

    114Wa Chef’s Dropleaf Island — Parts List (cont.) M – Drawer – Qty. 1 P – Leaf Support – Qty. 2 Q – "J" Hook (assembled) – Qty. 4 T – Drawer Handle – Qty. 1 V – 3/8" x 2½" Hex Bolt W –...
  • Page 4: Tools Required

    114Wa Chef’s Dropleaf Island Assembly Instructions Tools Required: Phillips Head Screwdriver, Adjustable or 9/16" Wrench, Tape Measure, Wood Glue IMPORTANT NOTE: Apply fnish to this unit before the final assembly. Prior to doing so, read the enclosed finishing hints. Fig. 1a Fig.
  • Page 5 Fig. 2 2. Spread a thin layer of glue into the holes of the Towel Bar (F) and insert the chucked ends of the Towel Bar Supports (G). Gently tap with a rubber mallet and quickly wipe away any excess glue. Decide which end of the island you want to place the towel bar.
  • Page 6 " Fig. 4 Fig. 4a LEAF 4. Mark the locations of the screw holes for the Leaf Supports (P) 3-1/16" up on the apron and 3" from the leg. See Figures 4 and 4a. Using a Phillips Head Screwdriver, punch a pilot hole for each screw.
  • Page 7: Notas Importantes

    Modelo # 114Wa Mesa Central de Concina con Hoja Abatible Instrucciones para Armar NOTAS IMPORTANTES: Sólo para uso doméstico. NO se recomienda para uso comercial. Ne se suba, no se siente ni se pare sobre este mueble. No mueva este mueble mientras esté lleno. Vacíelo antes de moverlo.
  • Page 8 114Wa Mesa Central de Cocina con Hoja Abatible Lista de Piezas ANTES DE COMENZAR A ARMAR EL MUEBLE, verifi que que haya recibido todas las piezas que se indican en la lista de piezas a continuación. Parte Descripción Cantidad Parte Descripción Cantidad ENSAMBLE DE LA PARTE SUPERIOR...
  • Page 9 114Wa Mesa Central de Cocina con Hoja Abatible — Instrucciones para Armar — continuado Fig. 4 – LONG ARM = BRAZO LARGO; 2. Con pegamento, pegue el extremo reducido de los APRON = FALDÓN soportes para el toallero (G) dentro de los orificios TOP = PARTE SUPERIOR;...
  • Page 10 No. de Modèle 114Wa Îlot de Prêparation Culinaire à Abattant Instructions de Montage REMARQUES IMPORTANTE: Pour usage ménanger normal seulement. N’est pas recommandé pour usage commercial. Ne pas monter, s’asseoir ni se mettre debout sur cet article d’ameublement. Ne pas déplacer cet article d’ameublement s’il est chargé. Le décharger avant de le déplacer.
  • Page 11: Instructions De Montage

    114Wa Îlot de Préparation Culinaire à Abattant Nomenclature des pièces AVANT DE COMMENCER LE MONTAGE, assurez-vous que les quantités de pièces reçues correspondent à la nomenclature des pièces figurant ci-dessous. Pièce Description Quantité Pièce Description Quantité ENSAMBLE DE LA PARTE SUPERIOR CLAIE Dessus (jointe) .
  • Page 12 114Wa — Instructions du Montage — continu Fig. 4 – APRON = TABLIER; LONG ARM = BRAS LONG; 2. Collez l’extrémité filetée des supports du porte- TOP = DESSUS; serviettes (G) dans les trous du porte-serviettes (F). LEAF = ABATTANT Décidez à...
  • Page 13 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
  • Page 14 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.

Table of Contents