Advertisement
6. MAINTENANCE
Refer to fig.1
Only fully qualified personnel should attempt maintenance or repair.
NOTE:
6.1.
Keep the load sling adjuster clean and regularly lubricate the threaded rod (d).
6.2.
Carry out a visual inspection every time the adjuster is used.
‰
WARNING! The load chains and brackets are made from special alloy steels and precisely heat treated. DO NOT
weld or re-heat treat.
6.3.
depending on the frequency of use and local conditions the adjuster will eventually show signs of wear at which point it
should be replaced. overloading or incorrect hooking may distort the brackets, if this occurs replace immediately.
fig.1
ENvIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
lS501 Issue 2 (HF) 17/07/18
Advertisement
