Well HTR-CNV-2000-WL Installation And Operating Manual

Well HTR-CNV-2000-WL Installation And Operating Manual

Advertisement

Quick Links

Installation and Operating Manual
Convection Heater
Preorder No.: HTR-CNV-2000-WL
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HTR-CNV-2000-WL and is the answer not in the manual?

Questions and answers

Summary of Contents for Well HTR-CNV-2000-WL

  • Page 1 Installation and Operating Manual Convection Heater Preorder No.: HTR-CNV-2000-WL...
  • Page 2 This appliance has been designed to operate from a standard domestic power outlet. It is not intended for industrial or commercial use. This product is only suitable for well insulated spaces or occasional use. Please retain for future reference. ASSEMBLY OF THE HEATER Before using the heater, the feet (supplied separately in the box), must be fitted to the unit.
  • Page 3 set safety threshold, the cut-out will switch off power to the heat elements, eliminating further danger. Let the heater cool for approximately 10 minutes, then it will function normally again. In the event of a thermal cut-out, check for visible obstructions to air inlets. Try moving the appliance to a new position.
  • Page 4 Warning: Do not place the heater on LONG PILE CARPET OR FLOKATI RUGS. Use a heat board if necessary. Warning: In order to avoid overheating, do not cover the heater. WARNING If the power cord is damaged, the power cord must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Page 5 INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS HTR-CNV-2000-WL Model identifier(s): Item Symbol Value Unit Heat output Nominal heat output Pnom Minimum heat output (indicative) Pmin 0.75 Maximum continuous heat output Pmax,c Auxiliary electricity consumption At nominal heat output elmax At minimum heat output...
  • Page 6 Technical Specifications: Power Supply AC 230V ~ 50Hz Power Consumption: 2000W NOTE: As a result of continual improvements, the design and specifications of the product within may differ slightly to the unit illustrated on the packaging. Waste electrical and electronic equipment are a special waste category, collection, storage, transport, treatment and recycling are important because they can avoid environmental pollution and are harmful to health.

Table of Contents