Hacker STUNT 3.0 Manual

Para-RC „STUNT 3.0" mit Pilot
Thank you for your interest in our products. We have invested much time and care into this new aircraft model to prepare you a
maximum of pleasure and fun flying. The paraglider is made from high quality materials and is mostly ready to fly. The Para-
glider RC STUNT 3.0 can also be flown by relatively inexperienced pilots. It is suitable, with appropriate setting, even for thermal
flying and freestyle maneuvers. As a paraglider has no rigid surface, the handling is different from a normal glider model. Please
take some time and study carefully the instructions. It contains some tips and tricks that will make flying a model glider to a great
experience.
Unpacking / Mounting:
For the first time spread out the glider in a clean room. The glider is laid with the top sail on the floor. Take the risers and sort
the lines in order to avoid rotation or knotting. The risers have three rows of lines: A (front) - B (middle)-C (rear). Begin simply
with the A-level, the other levels will be sorted almost by itself. Important is the main brake line and the brake lines. The brake
line are very important for the control of your paraglider. Now hooked the risers into the carabiner of the harness that the A-level
in the lead.