Advertisement
Quick Links
Advertisement
Related Manuals for Warner Electric MCS-805 Series
Summary of Contents for Warner Electric MCS-805 Series
- Page 1 MCS-805 Series Clutch/Brake Controls Installation Instructions 819-0556 P-8854-WE...
-
Page 2: Table Of Contents
The MCS-805-1 and the MCS-805-2 have an 2 series clutch/brake controls are designed for internal adjustment potentiometer that is used for operation with Warner Electric electrically released the release band adjustment. The MCS 805-2 is brakes. The correct brake release voltage is a similar to the MCS-805-1 except that it has torque specific point between 35-75VDC. -
Page 3: Specifications
Release band adjustment (via internal potentiometer) MCS-805-2 only: Torque adjust (via external potentiometer) Wiring Entrance: Two 7/8” diameter conduit entrance holes located on the bottom and on the top of the control chassis. Warner Electric • 800-825-9050 P-8854-WE • 819-0556 3... -
Page 4: Installation
For MCS-805-2 Only: Set partial engagement torque using the external potentiometer. Switch Screwdriver connected to terminals 3 and 4 must be open Adjust to make this adjustment. A setting of 10 gives maximum torque. 4 Warner Electric • 800-825-9050 P-8854-WE • 819-0556... -
Page 5: Dimensions
50-60 Hz 805-2 Chassis ONLY Closed - brake released Brake Open - brake engaged Closed - full engage volts AC INPUT Open - reduced engage volts 115/230 VAC (torque adjust) 50-60 Hz Warner Electric • 800-825-9050 P-8854-WE • 819-0556 5... -
Page 6: Warranty
Warner Electric, Inc. be liable for consequential, indirect, or incidental damages of any kind incurred by reason of the manufacture, sale or use of any defective product. Warner Electric, Inc. neither assumes nor authorizes any other person to give any other warranty or to assume any other obligation or liability on its behalf.