Clean And Storage - Lanaform MANI UV Manual

1012_NOTICE 17/11/04
5) Polishing Cone
For a perfect finish, smooth around nail edges after filing and polishing nail
surfaces.
6) Rough Grain Cone
To treat and remove hard skin on heals, on soles and anywhere hard skin is
present.
7) Shaping Sapphire Disc
Use to file and shape your nails.
How to use your UV nail dryer
This appliance is equipped with a UV nail dryer.
The dryer consists of a special UV lamp with the specific wavelength for super fast
and complete drying of normal UV nail gel, UV-lacquer, UV-glue, transparent or
coloured nail polish. It also hardens for healthy growth and stronger nails.
• Push the UV dryer switch to ON "I" position and the UV lamp will light up.
• Treat your nail with the desired UV-gel, UV-lacquer, or polish.
• Put your nail onto the soft pad. Your nail will be dry in a minute's time.
• Be careful not to touch the UV lamp.
• The UV lamp lasts a long time, uses little energy and is highly efficient. It is
replaceable. Ask your dealer or qualified personnel to replace the bulb.
• DO NOT leave your UV lamp unattended when plugged in.
• DO NOT stare at the UV lamp directly when using.
• Only use your UV lamp to treat your nails. Switch off when not in use.

CLEAN AND STORAGE

To clean
• Unplug the appliance before cleaning.
• Never immerse the unit in water.
• Wipe the unit with a damp cloth or sponge, and dry with a soft cloth. DO NOT
allow water or any other liquid to get into the unit.
• Clean the unit after use to avoid accumulation of grease and other residues.
To store
Keep this product in a safe, dry, cool place, out of the reach of children.
12:33 Page 16