Advertisement
Quick Links
1.
Take one leg frame (Part B or
Part C, it does not matter which),
and lay it flat on the ground.
3.
Take the other leg frame (Part B
or Part C), and insert the seat
tubes on the opposite side of
the seat
(Part A)
into the
leg frame.
Make
sure the
brass
buttons
snap
firmly into
the leg
frame.
5.
Slide the Commode Pail into the
tracks located under the seat to
use as a commode. Or slide the
Splash Guard into the tracks
located under the seat to use as a
raised toilet seat.
2.
Take the padded seat with the two
pre-assembled tubes located under
the seat (Part A), and insert the two
tubes into the leg
frame (Part B or
Part C). Make
sure the brass
buttons snap
firmly into
the leg frame.
4.
Take the 4 legs (Part D), and insert
them into the bottom of the leg
frames. Set the chair height by using
the same button-hole location for
each leg. Make sure the brass
buttons
snap
firmly into
the leg
frame.
6.
FOR 74655 ONLY: Insert the Seat Cut-
Out Fill-In into the seat hole and
remove the Commode Pail or Splash
Guard to use as a shower chair.
Advertisement
Related Manuals for Eagle Health Supplies 74654
Summary of Contents for Eagle Health Supplies 74654
- Page 1 Take one leg frame (Part B or Take the padded seat with the two Part C, it does not matter which), pre-assembled tubes located under and lay it flat on the ground. the seat (Part A), and insert the two tubes into the leg frame (Part B or Part C).
- Page 2 Thank you for purchasing an Eagle Health Supplies product! If you would like to register your product for the 1-year warranty, Email: sales@eaglehealth.com please fill out the included Warranty Card, and return to Eagle Health Supplies. Phone: (714) 532 – 1777 Fax: (714) 532 – 9777...
Need help?
Do you have a question about the 74654 and is the answer not in the manual?
Questions and answers