saro BUSSO T 1 Operating Instructions

General notes

•
Carefully read these operating instructions through as they contain important information.
•
It is advisable to keep the operating instructions in a place where you have them always
ready to hand. Should you pass the salamander on to a third party, this instruction
manual must be handed on.
•
As soon as you have unpacked the salamander, check whether everything is in a
faultless condition. Should anything be damaged, do not connect the appliance as such,
but inform your dealer.
•
The salamander must only be used for the intended purpose. Improper use can cause
damages and lead to the loss of the warranty.
•
Before you connect the salamander, make sure that the type of current stated on the
identification plate corresponds with your mains supply.
•
In the case of fault and/or malfunction, pull the plug out of the socket and inform your
dealer. He will carry out the repair with original spare parts.
•
Please observe the local regulations concerning accident prevention and disposal.
•
Before each cleaning, the salamander has to be disconnected from power socket.
•
The manufacturer/dealer cannot be made responsible for damages which arise through
not observing these operating instructions. Apart from this, if these instructions are not
observed, oven safety is no longer guaranteed.
Operating Instructions
Toaster / Salamander
Model „BUSSO T 1" and „BUSSO T 2"
Order no. 172-1200
info@saro.de
172-1210
Page 1