Advertisement
Advertisement
Table of Contents
Summary of Contents for John Berends Implements 0130
- Page 1 John Berends Implements Pty Ltd AGRICULTURAL ENGINEERS OPERATOR’S MANUAL PARTS LIST Carryalls PRODUCT NO. 0130 Carryall 6’ x 3’6” 0135 Carryall 4’ x 3’ 130 FRANKSTON RD, DANDENONG, VIC. 3175 AUSTRALIA PHONE (03) 9791 2494 FAX NO. (03) 9794 5568...
- Page 2 TABLE OF CONTENTS Page No. SAFETY INSTRUCTIONS................3 SAFETY FEATURES..................6 ASSEMBLY.....................7 OPERATION....................7 MAINTENANCE....................7...
- Page 3 SAFETY Farm machinery is dangerous if operated incorrectly so please read this manual in its entirety prior to operating the machine. No operator, however experienced in farm machinery operation, should attempt to use any machine they have not been competently trained to use. Your local Department of Agriculture can help you with training, as can most Occupational Health and Safety offices, Agricultural schools and colleges and farm equipment dealerships.
- Page 4 If machine starts to vibrate, stop tractor using method as described in the operation section. After striking a foreign object or if the there are doubts about the performance of the machine, stop the tractor as described and check if machine is making excessive noise.
- Page 5 1000 kg Nett Weight (kg) WARRANTY John Berends Implements P/L warrants each new product sold to be free from defects in material and workmanship, under normal use and service, as outlined in the operator’s manual, for a period of 12 months.
- Page 6 Safety Features 1. SERIAL NUMBER (Decal) 2. WARNING DECAL 3. BERENDS DECAL...
- Page 7 ASSEMBLY Line the lower linkage arms between the lower linkage plates of the implement, slide the linkage pins through the holes and secure with linch pins. Ensure the lower arms of the tractor have an anti-sway device fitted such as stays or chains. This prevents the implement from swinging side to side during transport.
Need help?
Do you have a question about the 0130 and is the answer not in the manual?
Questions and answers