Operation; To Set Clock - Learning Resources Time Tracker Manual

Page 2 of 10
Copyright ROMPA® Ltd

OPERATION

The timer has three modes:
CLOCK: a typical digital clock
MANUAL: program exactly how long you want each colour section to be illuminated
AUTO: Program the total amount of time, and the colour sections will automatically be divided
into 80% green, 15% yellow and 5% red. For example, if you program 10 minutes as your total
time, the green section will remain illuminated for 8 minutes; the yellow section for 1 minute 30
seconds and the red section for 30 seconds.
Before setting the time, please note: if you don't press any key for 20 seconds, the product will
exit the programming the mode. Press MENU at any time to return to the previous step. Once
you have set the Manual and/or Auto Timer, the times will remain programmed till you change
them. Once programmed, you can go to START TIMER.
Sound Effects
You can choose a sound effect to be played before one, two or all three coloured section.
These sounds are:
Begin! Bell Siren Buzzer Ticking Clock Time's Up!

To Set CLOCK

Press and hold the START and ENTER buttons at the same time for 3 seconds.
Press ENTER
Choose 12hr or 24hr. Use buttons to move the curser. Press ENTER to accept.
Set time: Use the buttons to scroll through the numbers (hours:minutes:seconds) and
press ENTER to accept.
TIME TRACKER 20388, KH 1.11