Introduction; Safety; Safety Sign Location - Pioneer Appli-Pro SLV C500 Operation Manual

Introduction


The Appli-Pro SLV C500 (Super Low Volume Tank Mix) Application System was built for DuPont Pioneer
by a leading agricultural manufacturer. The C500 is an integrated system, designed and calibrated specifically
®
for Pioneer brand products. This manual will take you through the steps of operation of the applicator and also
point out all safety precautions that need to be made while using the applicator. Read this manual carefully to
learn how to operate the equipment correctly. Failure to do this can result in personal injury or equipment
malfunction. If you are unsure about operating the system after consulting this manual, contact your local
authorized dealership for additional assistance. If you are in need of parts for the system please see the parts
breakdown in the back of this manual and contact your local authorized dealer to order the parts.
This unique system was developed to offer you the following advantages:

Treat up to 500 tons with 5 liters of water.

Operator time savings with fewer stops due to switching bottles.

Unique back-flush system makes cleaning easy.

System works without the use of solenoids for reduced maintenance.

Basic product delivery system is identical to SLV which provides excellent rate and distribution based
on SLV experience.

Tank can be removed for easier cleaning.

John Deere GreenStar compatible.

Dedicated compressor air intake for prolonged compressor life.
For information on how to install the C500 to your machine, refer to the Installation Manual.

Safety

Carefully read all the safety signs in this manual and on the applicator before use. Keep signs clean and in
good working order. Replace missing or damaged safety signs. Replacement signs are available from your
local authorized dealer. See your installation manual for under the replacement parts section for the correct
part numbers.
Keep your applicator in proper working condition. Unauthorized modifications to the applicator may impair the
function and/or safety of the machine.
Carefully read and understand all of the applicator safety signs before installing or servicing the applicator.
Always use the supplied safety equipment on the forage harvester to service the applicator.
Safety Sign Locations
1
2
4
3
4