Summary of Contents for Injectidry Systems DIRECT-IT IN
- Page 1 OWNER’S MANUAL DIRECT-IT IN October 2006 Injectidry Systems, Inc. Phone: 425-822-3851 Fax: 425-745-8480 Toll Free: 800-257-0797 www.injectidry.com...
- Page 3 HOW TO ATTACH THE DIRECT-IT IN (UAA1) Step 1. Place the Direct-It IN in front of the airmover to be used (as shown in picture below). Step 2. Insert the snout of the airmover into the back of the Direct-It IN housing.
- Page 4 HOW TO ATTACH THE DIRECT-IT IN (UAA1) Continued Step 4. Repeat Step 3. Step 5. We recommend placing the Direct-It IN in the center of the run to be dried. The hosecuffed ends of the supplied hoses may now be installed on the Direct-It IN. Stair Drying...
- Page 5 SUGGESTED HOSE LENGTHS We ship the hose blank. This allows you the freedom to choose whatever lengths make the most sense to you. Replacement or extra hose is available. Be cautious when cutting your hose with sharp instruments for your own safety and that of the surface you are cutting on.
- Page 6 Injectidry Systems Repair Department must authorize all incoming products and/or repair work to be completed by an authorized repair center. Injectidry Systems is not responsible for any repairs or modifications to any of its products, unless completed by Injectidry Systems or an authorized service center. We are not responsible for subsequent damaged caused by the user and or its agents.
Need help?
Do you have a question about the DIRECT-IT IN and is the answer not in the manual?
Questions and answers