MicroTouch Autofocuser Operating Instructions Manual page 6

Installing the MicroTouch and FocusMax Software
Load the included CD. Alternatively, you can download the latest installer from the
MicroTouch product page on Starizona.com.
There are several files that must be installed.
If you do not already have the ASCOM Platform installed on your computer, begin by
running the ASCOMPlatformXX.exe file. This will take a couple minutes to install.
Next, install FocusMax by running the FocusMax(3.8.0.20)setup.exe file.
Now we need to install the hardware drivers for the MicroTouch unit. Go into the
MicroTouch USB Driver folder. There are two driver installers, depending on whether
you have a 64-bit or 32-bit operating system. Most computers with Windows 7 or newer
will be 64-bit. Run the StarizonaUSBDriverInstaller_x64.exe (or x32.exe if you have a
32-bit OS).
Go back out of the Starizona USB Drivers folder to the main directory. Run the
MicroTouchControllerSetup_X_X.exe installer. This will install the MicroTouch
Controller application.
Finally, run the MicroTouchDriverSetup_X_X.exe file that will install the ASCOM
drivers for the MicroTouch.