Broadcom HLMP-0103 Product Overview

T-1-3/4 (5 mm) panel mount clip and retaining ring

HLMP-0103

T-1-3/4 (5 mm) Panel Mount Clip and Retaining

Ring

Description

The Broadcom

HLMP-0103 is a black plastic mounting clip

and retaining ring. It is designed to panel mount Broadcom

high-profile T-1-3/4 size lamps. This clip and ring

combination is intended for installation in instrument panels

from 1.52 mm (0.060 in.) to 2.67 mm (0.105 in.) thick. For

panels greater than 2.67 mm (0.105 in.), counterboring may

be needed to the required thickness.

Broadcom

1. Drill a 6.45/6.63 (0.254/0.261 in.) diameter hole in the

panel. Deburr but do not chamfer the edges of the hole.

2. Press the panel clip into the hole from the front of the

panel.

3. Press the LED into the clip from the back. Use blunt long

nose pliers to push on the LED. Do not use force on the

LED leads. A tool, such as a nut driver, may be used to

press on the clip.

4. Slip a plastic retaining ring onto the back of the clip and

press tight using tools such as two nut drivers.

See the following figure.

Product Overview

5989-0046EN

January 24, 2018

Table of Contents

Do you have a question about the HLMP-0103 and is the answer not in the manual?

Page 1 HLMP-0103 is a black plastic mounting clip panel. Deburr but do not chamfer the edges of the hole. and retaining ring. It is designed to panel mount Broadcom high-profile T-1-3/4 size lamps. This clip and ring 2. Press the panel clip into the hole from the front of the combination is intended for installation in instrument panels panel.
Page 2 HLMP-0103 Product Overview T-1-3/4 (5 mm) Panel Mount Clip and Retaining Ring Package Dimensions 0.290±0.010 Ø 7.37±0.25 0.220±0.010 Ø 5.59±0.25 0.025 +0.005-0.010 0.375 TYP. 4X Ø 9.53 0.64 +0.13-0.25 0.265 Ø 0.238 0.065 6.73 Ø 0.080 6.05 1.65 2.03 0.005±0.003 0.110...
Page 3 HLMP-0103 Product Overview T-1-3/4 (5 mm) Panel Mount Clip and Retaining Ring Mounting Instructions Broadcom 5989-0046EN...
Page 4 The term “Broadcom” refers to Broadcom Limited and/or its subsidiaries. For more information, please visit www.broadcom.com. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.