Visual Indicator Sounder Beacon Series
Summary of the range
Product
Details
Base variant
P80SB
Addressable Base Sounder
P80AIB
Addressable Base Sounder Beacon VID
Wall variant
P80SW
Addressable Wall Sounder White
P80SR
Addressable Wall Sounder Red
P85SR
Addressable Wall Sounder Weatherproof
P80AIW
Addressable Wall Sounder Beacon VID White
P80AIR
Addressable Wall Sounder Beacon VID Red
P85AIR
Addressable Wall Sounder Beacon VID Weatherproof
Accessories
B-CAP
Blanking Cap For Sounder/VID/VAD Bases
A-CON
Conduit Adaptor For Sounder/VID/VAD Bases
S-BOXR
Shallow Surface Back Box For Indoor Wall Sounder/VAD/VID Red
S-BOXW
Shallow Surface Back Box For Indoor Wall Sounder/VAD/VID White
A-BOX
Flush Backbox Adaptor For Indoor Wall Sounder/VAD/VID
D-BOXR
Deep Surface Back Box for Indoor Wall Sounder/VAD/ VID Red
D-BOXW
Deep Surface Back Box for Indoor Wall Sounder/VAD/ VID White
Performance characteristics
Mounting orientation
Indoor type A/outdoor type B
Weight (g)
Housing material
Housing colour
Operating temperature (°C)
Storage temperature (°C)
Humidity
Pressure
Sounder volume settings
EN54-17 isolator
EN54-3 sounder
Visual indicator
Vibration, shock, corrosion, EMC
Beacon flash rates
Ingress protection
High volume
Mid High volume
Mid Low volume
Low volume
Flash colour
*Not EN54-3
1/6
P80SB
P80AIB
P80SW
Ceiling
Indoor
146
154
182
PC-ABS
PC
White
Clear
White
-25 to +70
4
No
Yes
-
0.5 and 1 Hz
-
IP21C
Sounder output at 1 metre
90 dBA
80 dBA
70 dBA
60 dBA*
-
Red
The Visual Indicating Device (VID) Sounder Beacons and Sounders are
loop powered units that are driven from an addressable controller
panel.They are available in ceiling and wall mounted variants, including an
outdoor wall version.
The ceiling mounted variants provide a base for fitting a fire detector.
Alternatively, a blanking cap is fitted.
The beacons are not EN54-23 compliant and are not suitable for
applications that require a VAD (Visual Alarm Device).
All VID Sounder Beacons and Sounders have a built-in two port loop short
circuit isolator.
Settings for tones, volume, beacon flash and status monitoring are
configurable using the control panel.
Selectable flash rates are:
1Hz (one flash every second)
0.5Hz (one flash every two seconds)
Order number
576.080.002
576.080.010
576.080.003
576.080.004
576.080.005
576.080.011
576.080.012
576.080.013
557.080.001
557.080.002
557.080.007
557.080.008
557.080.010
557.080.011
557.080.012
P80SR
P85SR
Wall
Outdoor
182
358
PC-ABS
Red
-10 to 55
-25 to +70
-25 to +70
Up to 95% non-condensing
Sounder SPL output quoted for 1000 mBar
Yes
Yes
No
Complies with EN54 series requirements
-
-
IP55
100 dBA
90 dBA
-
In scope/fitted
□
□
□
□
□
□
□
□
□
□
□
□
□
□
□
P80AIW
P80AIR
P85AIR
Indoor
Outdoor
194
194
372
White
Red
-10 to 55
-25 to +70
2
Yes
0.5 and 1 Hz
IP21C
IP55
-
-
Red
Doc. version 1.0