Volfoni ActivHub RF50 User Manual

SUMMARY
Content

1. PRODUCT OVERVIEW

1.1 DESCRIPTION

1.2 CONTENT OF THE ACTIVHUB RF50 SYSTEM

1.3 CONNECTORS AND FUNCTIONS

1.4 REQUIREMENTS

2. Compatibility
3. Using Your Activhub Rf50
3.1 Powering Your Activhub Rf50
3.2 Selecting The Synchronization Source
3.3 Selecting The Emission Channel
3.4 Examples Of Setups
4. Advanced Uses
5. Led Significances
6. Software Updates
7. Technical Specifications
8. Important Safety Recommendations
9. Maintenance Of The Activhub Rf50
10. WARRANTY
11. CONTACT
12. REGULATORY STANDARDS
1. PRODUCT OVERVIEW
1.1 Description
The ActivHub RF50 is an emitter used to wirelessly synchronize
3D glasses with a 3D display system.
It can receive 3D synchronization via
- Wired link, typically VESA-DIN3 or BNC connectors
- Infra-Red link, from a wide variety of sources like 3DTVs and
3D IR emitters
- DLP-link embedded in the 3D images of a 3D-Ready
It can transmit 3D synchronization via
- RF link from any 3D source.
Page
- VESA Link (square signal 0-5V)
Its intelligent core allows it to be
2.
- Automatically compatible with most 3D display brands using
2.
IR synchronization
2.
- Upgraded to new functions via volfoni's website
3.
It is especially suitable for
4.
- Virtual Reality centers, thanks to its omnidirectional, interference
5.
-free RF link
5.
- Digital Content Creators, thanks to its selectable 12-channels RF Link
5.
- 3D professionals, thanks to its industry-wide multi-brand compatibility
5.
1.2 Content of the ActivHub RF50 Kit
5.
Your ActivHub RF50 kit includes;
7.
- an ActivHub RF50 3D emitter
7.
- a VESA-DIN3 to Jack 3.5 connection cable
7.
- a BNC & USB to Jack 3.5 connection cable
8.
- a USB A to micro-USB cable for maintenance and power
8.
8.
9.
1.3 Connectors and Functions
9.
1. USB connector
9.
2. Jack 3.5 connector
3. IR reception window
4. DLP-Link reception window
TM
5. Function selector
6. Power and Function LED
2.
User Guide
1.4 Requirements
The ActivHub RF50 is a 3D signal emitter to be used with active
glasses to view 3D contents played on an active 3D display
like 3D monitors, 3DTV or 3D projectors.
The ActivHub RF50 should receive the 3D synchronization
signal from an Infra-Red source, a DLP-link
projector, or a VESA-DIN3 or BNC connector. It can transmit
the 3D signal RF, in the following configurations.
projector The ActivHub RF50 can transmit RF synchronization when
TM
connected to a VESA or BNC cable
3D Content
Movie, sports...
The ActivHub RF50 can transmit RF synchronization when
receiving an IR 3D signal.
3D Content
Movie, sports...
The ActivHub RF50 can transmit RF synchronization when
receiving a DLP-Link 3D signal.
3D Content
Movie, sports...
2.
6.
For complex installation please contact Volfoni technical
support, support@volfoni.com.
5.
3.
4.
1.
3.
RF50
model
VPES-04100
TM
In=Wire, Out=RF
ActivHUB
Active 3D
display
3D Player
Computer, Blu-Ray...
In=Wire, Out=RF
ActivHUB
Active 3D
display
3D Player
Computer, Blu-Ray...
In=DLP, Out=RF
ActivHUB
compatible 3D
RF glasses
RF glasses
RF glasses