Subscribe to Our Youtube Channel
Related Manuals for Solem LR-MB
Summary of Contents for Solem LR-MB
- Page 1 L’EXPERT DE L’IRRIGATION CONNECTÉE L’EXPERT DE L’IRRIGATION CONNECTÉE THE CONNECTED IRRIGATION EXPERT LR-MB LE RELAI Wi-Fi /LoRa Wi-Fi/LoRa RELAY LR-MB APPLICATION MySOLEM GRATUITE FREE MySOLEM APP INSTALLATION GUIDE...
- Page 2 1 - Install LR modules in buried plastic manholes and to position them as high as possible in the eye. 2 - Position the « LR-MB » or its remote antenna as high as possible, with a clear environment. 3 - To test the LoRa connection between «...
- Page 3 INFORMATIONS LoRa connection periodicity between « LR-MB » and his modules is 3 minutes. Remotely, each modification of program or manual control will be effective after a delay of 3 minutes. On the « LR-FL » module : - Recording of the count, every 15 minutes.
- Page 4 Step 1 DOWNLOADING 1. On your smartphone and/or tablet, go to the « App Store » and/or « Google Play » app. 2. Look for « MySOLEM » in the search bar. MySOLEM 3. Download the MySOLEM application. 4. Once installed, activate the Bluetooth® of your smartphone and/or tablet...
-
Page 5: Create An Account
Step 2 CREATE AN ACCOUNT 1. On your smartphone and/or tablet, launch the « MySOLEM » application 2. Enter the « My Accounts » tab 3. If you already have an account, fill in your credentials. Otherwise, follow the steps to create an account. -
Page 6: Installation
Step 3 INSTALLATION LR-MB 1. Make sure the place where you want to install the « LR-MB » is covered by the Wi-Fi connection of your internet box. 2. Screw on the antenna, and connect the 230VAC power supply provided with the «... - Page 7 6. Select the « LR-MB » you wish to install from the list of available modules under « Select the LR-MB programmer » 7. Select the Wi-Fi network access to which you want to connect your « LR-MB » by clicking on the corresponding line or «...
-
Page 8: Association Modes
MODULES LR 2 ASSOCIATION MODES : 1/ Factory pre-association In this mode, the « LR-MB » is pre-associated at the factory with the other LR modules. The whole form a custom KIT LR. Power up the modules and test the LoRa... - Page 9 Step 5 ASSOCIATION Manual 1/ Position the LR module within range of « LR-MB » (<10m) 2/ Go to the home screen, press on 3/ Select the type of module to install.
- Page 10 4/ Select your module from the list of programmers. The displayed number corresponds to the « Default name » present on his product label. Once the selection is made, the module(s) appears...
- Page 11 5/ Select the module you just added by tapping it. Press on top right to access the product information page.
- Page 12 6/ Pairing : Tap « Remote Access » 7/ Select your « LR-MB » 8/ Press to validate the operation.
-
Page 13: Connection Test
LoRa CONNECTION TEST Once your network is made up: « LR-MB » installed and connected to the Wi-Fi network, modules associated with « LR-MB », you can test the LoRa connection between the « LR-MB » and the modules to validate the... - Page 14 2/ The message indicates that the LoRa connection between the « LR-MB » and the module is reliable. In case the connection is not reliable, move the module closer to the « LR-MB », or vice versa, and repeat the procedure.
-
Page 15: Connection Status
LoRa CONNECTION STATUS These icons give the status of the last LoRa connection between the « LR-MB » and the LR modules. Connection < 5mn 5mn < Connexion < 10mn Connection > 10mn Non-transmitted changes Connection never etablished By pressing on one of the icons, you obtain a message giving the state of the LoRa connection. - Page 16 • Red LED flashing 2 times : alarm time : the LR-MB is no longer on time. If your product is connected to the MySOLEM platform, the time setting will be automatic. Otherwise, connect to the LR-MB from the application and check that the message «...
-
Page 17: Outdoor Antenna
MOUNTING OUTDOOR ANTENNA In the case of mounting the antenna outdoors with the optional extension of 5 or 10 meters, we recommend protecting the antenna with a plastic tube with an internal diameter of 15mm minimum. This tube will be clogged on his upper part to protect the antenna from the rain. - Page 18 CHARACTERISTICS Techniques Use : Permissible humidity : 90% (relative humidity) Ambient temperature of product use : 0°C to 50°C Guarantee : 2 years Dimensions : Width 8 cm x Height 8.2 cm x Depth 1.3 cm Alimentation : Power supply unit : INPUT : 100-240V ~ 0.2A Max 50/60Hz OUTPUT : 12V 0.5A Frequency band used and power emitted max :...
- Page 19 READ THE FOLLOWING SAFETY INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR USING THE LR-MB. BE SURE TO RESPECT RIGOROUSLY EMPLOYMENT PRECAUTIONS. The LR-MB must be installed indoors or under cover. Install your product so that the socket outlet is near the equipment.
- Page 20 The symbol « CE » indicates that this device complies with the European standards on safety, health, the environment and the protection of the user. Devices with the symbol « CE » are intended for sale in Europe. This symbol indicates that these types of electrical and electronic devices must be discarded separately in European countries.
Need help?
Do you have a question about the LR-MB and is the answer not in the manual?
Questions and answers