Related Manuals for Twinkly Pro TWPRO400WRLP
Summary of Contents for Twinkly Pro TWPRO400WRLP
- Page 1 Smart decoration solutions for professionals USERGUI DE TW P RO400W RLP REV 1.2 006 01...
- Page 2 READ AND FOLLOW ALL SAFETY INSTRUCTIONS USE AND CARE INSTRUCTIONS Read and follow all safety instructions. When the product is placed on a live tree, the tree Do not use seasonal products outdoors unless marked should be well maintained and fresh. Do not place on suitable for indoor and outdoor use.
- Page 3 Class A Disclaimer: This equipment has WARNING! TECHNICAL SPECIFICATIONS been tested and found to comply with Do not connect the light string to the the limits for a Class A digital device, power supply while it is in the packaging. No.
-
Page 4: Table Of Contents
TAB LE OF CONTEN TS Introduction Package Contents Installation Requirements INSTA LLA TIO N P RO CESS Connect Light Strings Powering up the Controller Controller’s LED Status Indicator Reset your Controller Multi-controller Setup... -
Page 5: Introduction
Introduction Thank you for choosing Twinkly Pro for your lighting needs. This manual will provide detailed instructions, guide you through the entire setup process, and assist you with the recommended installation procedure for your device(s). By reading this step-by-step guide you will: •... -
Page 6: Package Contents
Package Contents What is inside the box 1 TWPRO400WRLP Wi-Fi Controller 2 AC Power Adapter... -
Page 7: Installation Requirements
Installation Requirements What is required for the installation * 3 Twinkly Pro Light Strings (up to 2** per TWPRO400WRLP controller) 4 **TWPROSPLITTER-2 (allows to connect up to 2 strings to the same controller) * purchased separately... -
Page 8: Connect Light Strings
S TEP 1 Connect Light Strings You can connect up to 250 LEDs to a single port Type allowed - RGB (Red, Green, Blue) RGB+W (Red, Green, Blue + Warm White) AWW (Amber, Warm White, Cold White) NO TE You can connect up to 500 LEDs using TWPROSPLITTER-2 We recommend installing lights strings before Type allowed - RGB (Red, Green, Blue) connecting them to the controller(s). -
Page 9: Powering Up The Controller
S TEP 2 Powering up the Controller Connect the AC cable to the power adapter Connect the power adapter to a power socket Your controller is now powered up... -
Page 10: Controller's Led Status Indicator
Controller’s LED Status Indicator CO LO R M EANING MEAN IN G Flashing Green Direct Wi-Fi mode Device not connected Steady Green Direct Wi-Fi mode Device connected Flashing Blue Home Wi-Fi network mode Connection in progress Steady Blue Home Wi-Fi network mode Device connected Flashing Red Home Wi-Fi network mode... -
Page 11: Reset Your Controller
Reset your Controller Unplug Twinkly from the power socket Press and hold the controller button While holding the button, plug in Twinkly Keep holding the button until all LEDs turn red (or amber for AWW), then release the button... -
Page 12: Multi-Controller Setup
Multi- controller Setup Twinkly App functions for multi-controller installations: VERTIGO - Grouping - Join - Sync - Scenes 2,000 Bulbs - Mapping Installation... - Page 13 If you need any further information, please feel free to contact us: sales@pro.twinkly.com...
Need help?
Do you have a question about the TWPRO400WRLP and is the answer not in the manual?
Questions and answers