Husker Vinyl RANCH RAIL FENCE AND GATE Installation Instructions Manual

Advertisement

Quick Links

"Good Fences Make Good Neighbors"
RANCH RAIL FENCE
AND GATE
INSTALLATION INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RANCH RAIL FENCE AND GATE and is the answer not in the manual?

Questions and answers

Summary of Contents for Husker Vinyl RANCH RAIL FENCE AND GATE

  • Page 1 “Good Fences Make Good Neighbors” RANCH RAIL FENCE AND GATE INSTALLATION INSTRUCTIONS...
  • Page 2 HUSKER VINYL & G anch ence Installation Instructions BEFORE YOU START, IT’S IMPORTANT TO CHECK: • That fence or the fence post footings do not exceed your lot lines of your property. If you can locate your lot pins that would be great. Otherwise you may need to refer to the real estate agents lot plans or you may need to hire a survey company to come out and mark your lot lines just to be sure.
  • Page 3 HUSKER VINYL & G anch ence Installation Instructions PREPARE FENCE LAYOUT Please read this instruction sheet completely before starting work. Laying out the fence is an important first step toward a quality installation. NOTE: Ranch Rail fences are designed for level terrain. For Significant slopes in the terrain you will need to modify some of the posts and rails.
  • Page 4 HUSKER VINYL & G anch ence Installation Instructions SETTING POSTS STEP 1 Dig holes 8”- 10” in diameter and anywhere from 24”, 30” or 36” 2 RAIL deep depending on your local weather and soil conditions. STEP 2 Position the post in the hole. The post should be centered in the hole and must be square with the fence line so that when the rails are 24”...
  • Page 5 HUSKER VINYL & G anch ence Installation Instructions RAIL INSTALLATION STEP 1 Once the concrete is set up, slide the 16’ rails through the holes in the post. STEP 2 Secure rails inside post at each end as shown. STEP 3 Cut one 16’...
  • Page 6 During installation, your fence may have collected dirt. In most cases to clean your new fence you can just hose it off. For tougher marks, orange cleaner and a scotch brite pad works well to take those off. For more information contact: HUSKER VINYL inc. 402-923-0323 1-866-918-4695 (toll-free) 47287 U.S.

Table of Contents