LAN Connection Guide Set Up and Operation Adjustment of the ODIN CL-4 Connect Settings 01) Establish a connection with the ODIN CL-4 Connect. 02) Normally the SSID = ODIN. The password is: T-8A!Odin!S-18A. But, if the device has been reset to factory default settings, SSID = CL-4. The password is: 12345678. 03) Open your web browser and, in the address bar, type in 10.10.100.254.
Page 3
LAN Connection Guide Method 1 01) Connect the CL-4 Connect to a switch via LAN. Connect a PC to a switch via LAN. Fig. 01 Make sure that the switch does not use the IP address 10.10.100.254! This IP address is used exclusively by the CL-4 Connect! 02) Open the Odin Editor software and click on CONNECT.
Page 4
LAN Connection Guide Method 2 01) Connect the CL-4 Connect to a PC via LAN. 02) Assign a static IP address to your PC. It should be an address within the 10.10.100.xxx range. Subnet mask should be 255.255.255.0. Fig. 02 03) Open the Odin Editor software and click on CONNECT.
Page 5
LAN Connection Guide Design and product specifications are subject to change without prior notice. Website: http://www.odin-audiosystems.com/ Email: service@highlite.com Ordercode: D3915...
Page 6
LAN Connection Guide Notes Ordercode: D3915...
Need help?
Do you have a question about the Odin D3915 and is the answer not in the manual?
Questions and answers