Advertisement
LM585LD User Manual
Operation
1
2
3
1
5/8 threaded connector
2
Tune knob
3
Round water level
4
Foot screw
5
Screw hole
Vertical
laser
switch
5
4
5
Pulse switch/
Manual switch
Pulse indicator
Horizontal
laser switch
LM585LD User Manual
Install lithium battery pack
Slide the switch to unlock/lock position to turn on/off the
instrument. In self-leveling/manual mode, LED indicator
lights up green, the battery power screen keeps displaying
remaining power and stops displaying after turning off
the instrument for 5 seconds.
The instrument will conduct self-calibration after switching
on, the horizontal laser beam keeps lighting up after
calibration, and then the line laser enters self-leveling
mode, within 3°±1°, the instrument will conduct self-leveling,
if beyond 3°±1°, the instrument will emit flashing beams
and alarm.
Press H button to turn on/of f horizontal laser beam, press
V button to turn on/off vertical laser beams (Two horizontal/
vertical laser beams can be used together or separately).
When the instrument is ON, user can slide the lock switch
to lock position to turn off the switch.
Note:
This is to ensure that the instrument movement is locked
before users turn off the instrument.
6
Advertisement
