Advertisement
Turning the Digital Ultra Sight on
After the battery is inserted press
Power button to turn unit on. Adjust
reticle pattern with a push of the
Digital Brightness Control buttons to
the desired brightness. Hold the Ultra
sight away from you and look through
it with both eyes open to see a reticle
pattern.
MOUNTING
The Ultra Sight and Digital Ultra
Sight are designed to be mounted on
a standard 7/8 weaver rail.
CAUTION: Be sure gun is not loaded. Use safe
gun handling procedures at all times.
Slightly loosen horizontal fixation
screws. Place the scope on the
dovetail mount, making certain that
the mount aligns with the receptor
attachment screw. Re-tighten hori-
zontal fixation screws.
WINDAGE AND ELEVATION
ADJUSTMENTS
The vertical (elevation) and horizon-
tal (windage) adjustments for the
Ultra Sight and Digital Ultra Sight can
be achieved by turning the windage
and elevation adjustment mecha-
nisms. Each click equals 1/2 inch at
100 yards. When reaching the maxi-
mum of the rotation do not use force.
5
Reticle Patterns
Every Digital Ultra Sight comes with
five reticle patterns.
• Dot
• Post
• Post with Dot
• Open Cross Hair
• Cross Hair
You can choose your preferred pat-
tern by pushing the Reticle Pattern
Selector button.
MAINTAINING YOUR
ULTRA SIGHT
The Ultra Sight and Digital Ultra
Sight are waterproof and shock-
proof. However, you should never try
to take apart or clean it infernally
(it will void your warranty). If your
scope ever does need repairs or
adjustments, it should be returned
to ATN's service department. The
exposed optical surfaces will perform
their best if they are occasionally
wiped clean with a lens cloth or with
optical quality lens paper like those
for eyeglasses or camera lenses.
Maintain the metal surfaces of you
ultra sight by removing any dirt or
sand with a soft brush so as to avoid
scratching the finish. Wipe down the
scope with a damp cloth and follow
with a dry cloth. Finally, going over
the body with a silicon treated cloth
will restore luster and protect the
scope against corrosion, be careful
not to touch any of the lenses with the
silicon cloth.
Advertisement
